What did you do TO your Jeep JL today?

[Northeastbst]

Spent a good part of the day unpacking camping gear after 3 nights and 200 miles of Death Valley roads. it's a week and half old with just over 1,000 miles now.

Your living the dream a lot of people wish they could

Have fun bud!!!

Sponsored

 

[Revelation17]

Watched the glass repair guy fix the windshield chip I got last week. I can still see a halo but its way better and shouldn’t get worse.

Not today but installed a LOD rear bumper with tire carrier over the weekend. Much better than that 10 lb plastic stock one. Now I just need the rest of the goodies to get here.

 

[Northeastbst]

You might as well go ahead and order front adjustable lower control arms, adjustable front track bar and rear adjustable track bar or track bar relocation bracket with your Mopar lift, lol, I got 3.5 inches out of my Mopar lift, if you do, you’ll need these things to center your axles and get more castor.....

So true, save yourself the time of having to wait for the parts and order now.

Ever been behind a truck that is traveling straight but is kinda looks crooked?

You WILL need it...unless of course your ok will a caster and thrust angle that is wAy off.

 

[JavsJL]

SWEET! Mines on order. How long to install? One person?

3 hours or so, was easier second time around.

 

[turk]

Looks great. Where did you get the Black and White KC Pro 6 covers?

KC website provides the vector file for the pro6 light covers on their website so that you can make your own vinyl stickers for them color matched to your jeep. Had a local sign shop do mine.

 

[Jeep Generation]

KC website provides the vector file for the pro6 light covers on their website so that you can make your own vinyl stickers for them color matched to your jeep. Had a local sign shop do mine.

So you make a custom sticker and put it on the black and yellow cover to cover us the Yellow? Can you send the link of where the vector file is? I cant find it on their website.

 

[turk]

So you make a custom sticker and put it on the black and yellow cover to cover us the Yellow? Can you send the link of where the vector file is? I cant find it on their website.

Correct.

https://support.kchilites.com/hc/en...307-Pro6-LED-Light-Bar-Cover-Sticker-Template

 

[nerubi]

A balmy 16 deg F. Today for working on the jeep outside. Installed a garvin 54" wind deflector for my pioneer platform. Fabricated my own removable mounting brackets. Can still install and remove front freedom panels with deflector on.

Do you get any cash or discount for all the advertising? You should ask the manufacturers for some, looks like a Nascar car.

 

[Jeep Generation]

Correct.

https://support.kchilites.com/hc/en...307-Pro6-LED-Light-Bar-Cover-Sticker-Template

Thanks! I really appreciate it. I could not find this.

 

[ERAUGrad04]

Installed the Warn Zeon 10-S along with the warn winch plate into the factory steel bumper.

Also flexed out the new suspension. Looks like the 37s tuck nicely into the factor fenders without any rubbing. Woo hoo!

 

[JLRoachicon]

Finally got around to assembling my TopLift Pro so I could take the top off. First time topless, even at 50 degrees felt awesome Maybe next time I'll take the doors off too...

Hi Rob, can I ask where you bought your Toplift Pro? The Harken didn’t work in my garage configuration without making a lot of changes. I’m going to bite the bullet and order the Toplift. Should’ve done that in the first place.

 

[Birchrun]

Added some Rubicon wheels/tires to my dirty JLUS this weekend - very happy

 

[SSBattalion]

Looking good everyone.

 

[SSBattalion]

A balmy 16 deg F. Today for working on the jeep outside. Installed a garvin 54" wind deflector for my pioneer platform. Fabricated my own removable mounting brackets. Can still install and remove front freedom panels with deflector on.

Seven Slot Battalion

 

[robaw]

Hi Rob, can I ask where you bought your Toplift Pro? The Harken didn’t work in my garage configuration without making a lot of changes. I’m going to bite the bullet and order the Toplift. Should’ve done that in the first place.

I bought it direct from their website (https://www.topliftpros.com/). They had a Black Friday deal back in November so I got $100 off.

ICYMI - others have noted that it doesn't work quite as well with a JLU as it does with a JL, JK or JKU due to the design of the JLU top. It tends to lean toward the front of the top when on the lift so it's very unstable until you put the support rails in. Still a one-person task, but not as easy as the videos that I've seen make it look. That's my only "gripe", otherwise very nice product. Just thought I would share.

Sponsored