Lamin-X is a vinyl that is applied to headlights, fog lights, etc. They have clear as well as colors. I bought the yellow to reduce the reflection of the fog lights in rain and snow. It work's well but I may with switch out to Amber. A small sheet is enough to do the fogs and was around ~$15 at amazon. For more information: https://www.lamin-x.com
Had an extra ten minutes before picking up the rugrats so I also threw in the MORE dead pedal. Awesome mod, though I think I should have used the mid position instead of the close position, so I’ll probably have to reinstall soon. Unfortunate that it’s not adjustable without removal.
Lamin-X is a vinyl that is applied to headlights, fog lights, etc. They have clear as well as colors. I bought the yellow to reduce the reflection of the fog lights in rain and snow. It work's well but I may with switch out to Amber. A small sheet is enough to do the fogs and was around ~$15 at amazon. For more information: https://www.lamin-x.com
One may never know, if I tell you I will have to...
All three look awesome against a black JL!!! You have either the blackout look or you get some nice color contrast. Nice choice of wheels.Deleted the stock Sahara steps and Installed the Go Rhino D-6 Dominator Steps with removable drop steps. The stock steps were not very functional and extremely slippery when wet and for my wife who is only 5'2" it was a chore getting in and out, now she and get in and out with no problem with solid footing and then for offroad I can easily remove the drop steps and the board is then a slider.
Also I dressed up my XD Monster 822 wheels 18x9 with 35: KO-2, 2" Lift), these wheels have removable fins/spokes that you can get in Black Chrome and Red. Obviously the above is the Black and below I switched to the Chrome fins/spokes. I put the chrome on the driver side and left the black on the passenger still not sure which I prefer (any comment positive or negative appreciated) I am also contemplating Red fins/Spokes.
The wheels came with the Black fins and I ordered the Chrome fins, I am kinda tired of seeing blackout wheels on black rigs. I am ordering this week the Black Mountain Rubi Hood with the custom paint (pic below) so I think the Red will really work best. I just plasticoated (red) a set of the Black fins yesterday to try out. I really likes the versatility of the wheels, they also look great without the fins
Is it hard to install ?Had an extra ten minutes before picking up the rugrats so I also threw in the MORE dead pedal. Awesome mod, though I think I should have used the mid position instead of the close position, so I’ll probably have to reinstall soon. Unfortunate that it’s not adjustable without removal.
Interesting how different our experiences can be installing these. Is it tools? Expectations? Technique? Seems it’s either trivial to install or an absolute bastard.
Had an extra ten minutes before picking up the rugrats so I also threw in the MORE dead pedal. Awesome mod, though I think I should have used the mid position instead of the close position, so I’ll probably have to reinstall soon. Unfortunate that it’s not adjustable without removal.
Interesting how different our experiences can be installing these. Is it tools? Expectations? Technique? Seems it’s either trivial to install or an absolute bastard.
Seems that’s not a straightforward answer.
Interesting - did you go with your own different routing? If not, did it all snap back together just how it was before?
Front/back, as in you could "feel" the weight of it all? Or it actually moves to and fro a bit while still secured?
A simple piece of plate steel painted red. Bolted to the light holes on bumper and then 4 light holes equally placed. It has attitude!I dig that light rig! Cool bumper too. Blue looks great.
