New Baja Designs LP6 DOT headlight

[TEAMSLO]

Any more details available, these will obviously perform better than halogen but would like to see the comparison against the factory LED.

This is all I could tell from the video:

Sponsored

 

[AZJLguy]

got my set ordered cant wait to get them installed. hopefully they will be better than the factory LEDs because i really dont have any complaints about those, the LP6 headlights just straight up look cool

 

[Panda Mafia]

Contact them . I’m positive that I’ve seen people with coating issues get taken care of. And condensation is a no brainer that they’d fix it.

Yep, getting taken care of. Shipped the lights of already. Great service .

 

[Bandana]

When are we gonna see the installed pics and reviews???

 

[Panda Mafia]

Shoot me an email, Baja Designs products carry a lifetime warranty! I'll get you all taken care of. We apologize for any inconvenience.

Best,

Brahian Herrera | Forum Sales & Support
Email: [email protected] | Phone: (760) 560-2252 Ext 201

Thank you Brahian!
Got my babies back and they look brand spanking new! Lord know how tough it was without them. I use mine on the daily when I drive through farm land home.
PS I thinking of getting amber covers, to protect the front housing even a little in winter. How much worse will the light output be?

Before and after:

 

[Panda Mafia]

When are we gonna see the installed pics and reviews???

So far what YouTube recommended me on these headlights. Looks awesome.
The more I look at them the more I like it. With lifetime warranty and the service you get, id def buy it, if I had the funds. I love the amber backlight.
I just got Diode SS3 fogs just because of the back light so I can match it to my LP9 backlight and DRL orange turn signals. Will run 3 type of amber light as DRL and will turn off the halo light. Plus have some $$ left for 2024 grill upgrade. Otherwise id get the headlights :P

 

[AZJLguy]

well I’ve had the lights installed for about a week now. Install process was straightforward and simple which was great. The bolts they provide that go through the adjustment springs could be a hair bit longer to help but that was my only gripe with the install. Looks wise I’d give them a 10/10. As far as light output I’m not as impressed. I don’t believe they are brighter than my oem LEDs were, Infact the oem ones might provide more light? Also when switching between low beam and high beam there is almost zero improvement. I’m unsure on whether or not I will keep these or go back to the oem LEDs.

 

[jaymng]

Installed two Baja Designs DOT LP6 headlights on JLs — both fogged up. I’ve used LP6 and LP4 before with no issues, but this DOT version has a visible gap in the middle where air gets in. Can’t wash or use them in cold weather without fogging. Please address this issue!

 

[BajaDesigns]

Installed two Baja Designs DOT LP6 headlights on JLs — both fogged up. I’ve used LP6 and LP4 before with no issues, but this DOT version has a visible gap in the middle where air gets in. Can’t wash or use them in cold weather without fogging. Please address this issue!

Please reach out to our warranty department 800-422-5292 or [email protected]! Our Product carries a lifetime warranty and we can get some replacements right away. We will make sure to get this taken care of. Seems to be a issue with the O-ring which is letting water in. This is a isolated issue.

Best,

Brahian Herrera | Forum Sales & Support
Email: [email protected] | Phone: (760) 560-2252 Ext 201

 

[BajaDesigns]

well I’ve had the lights installed for about a week now. Install process was straightforward and simple which was great. The bolts they provide that go through the adjustment springs could be a hair bit longer to help but that was my only gripe with the install. Looks wise I’d give them a 10/10. As far as light output I’m not as impressed. I don’t believe they are brighter than my oem LEDs were, Infact the oem ones might provide more light? Also when switching between low beam and high beam there is almost zero improvement. I’m unsure on whether or not I will keep these or go back to the oem LEDs.

Thank you for your feedback on our new DOT LP6. I drove with the Factor LED Headlights and the New DOT Lp6 and output is going to be very similar when it comes to both lights. Where The DOT LP6 really stands out is in the blendability, the added side lighting for wildlife and our 5000k daylight.

I drove long distances with both lights and the biggest difference I saw was after multiple hours of driving. I was more fatigued due to the bluer color temperature from the factory headlights compared to our 5000k light which more neutral. I would say blendability also made a big difference with eliminating the fatigue. The Factory LED headlights are pretty much at its max when it comes to output and for some it won’t be worth it which is completely understandable, and we knew that from the beginning which is why we focused on blendability, color temperature, and horizontal spread which often get overlooked. We hope you’ll give the lights some time to truly show their advantages, and we’re confident those features will start to stand out. Feel free to reach out to me directly if you have any questions.


Best,
Brahian Herrera | Forum Sales & Support
Email: [email protected] | Phone: (760) 560-2252 Ext 201

 

[dr.dirty]

I agree with you about the light output compared to my stock LEDs. I have been running mine for about a month now and I do enjoy the light temp of the Baja Designs but the high beams leave a ton to be desired. My brackets broke during aiming so I had to modify them to get them aimed properly. A Guy on the Gladiator forum had the same issue.

How did you mount the s1 pods in your grill? I am looking at doing that soon and any advise would be great.

well I’ve had the lights installed for about a week now. Install process was straightforward and simple which was great. The bolts they provide that go through the adjustment springs could be a hair bit longer to help but that was my only gripe with the install. Looks wise I’d give them a 10/10. As far as light output I’m not as impressed. I don’t believe they are brighter than my oem LEDs were, Infact the oem ones might provide more light? Also when switching between low beam and high beam there is almost zero improvement. I’m unsure on whether or not I will keep these or go back to the oem LEDs.

 

[AZJLguy]

I agree with you about the light output compared to my stock LEDs. I have been running mine for about a month now and I do enjoy the light temp of the Baja Designs but the high beams leave a ton to be desired. My brackets broke during aiming so I had to modify them to get them aimed properly. A Guy on the Gladiator forum had the same issue.

How did you mount the s1 pods in your grill? I am looking at doing that soon and any advise would be great.

Reach out to Lakebed.innovations on instagram. They make the bracket for mounting the S1 pods in the grille. Great guys and the bracket is super easy to install. You can even order it from them with the lights all pre wired together if you’d like.

I went with just the bracket and purchased lights separately since I was ordering the dot lp6s from Baja designs anyways.

 

[dr.dirty]

So today my headlights started flickering not sure whats going on but it had never acted like this with the oem leds. I will contact @BajaDesigns and see what they say.


*EDIT* after taking another look at it it appears that its not flickering the driver side high beam is triggering and for some reason is now always on.

 

[aggiechris]

I installed mine yesterday. So far so good!

 

[pbacklund]

So today my headlights started flickering not sure whats going on but it had never acted like this with the oem leds. I will contact @BajaDesigns and see what they say.


*EDIT* after taking another look at it it appears that its not flickering the driver side high beam is triggering and for some reason is now always on.

I am having the same problem, except the passenger side high beam keeps triggering and staying on. Did you ever find a solution for this? Thanks.

Sponsored