What did you do TO your Jeep JL today?

[greenegger]

I tried to get some measurements for you, it looks to be about 2 feet 4 inches. Also if you raise the lift enough to be able to close the back window it could free up another foot and 3 inches.

ETA: scratch that last statement, I raised it to close the window and measured, it gives you and extra 11 inches when you close the window. So the closest you can get your bumper is 1 foot and 5 inches.

Thank you so much for remembering and taking the time to do this, it is really helpful. Cheers.

Sponsored

 

[greenegger]

Bartact Milspec seat covers installed in the front.

Dog seat cover for the rear.

Removed the carpet from the seating areas .

And my gun holster under the steering column.

Sorry for the picture bomb! Lol

What is the dog collar leash attachment thing??

 

[TankGirl]

I made sure everyone knew this wasn’t his Jeep.

 

[simpleJL]

What is the dog collar leash attachment thing??

The main seatbelt attachment is this: https://www.amazon.com/gp/product/B0791DLBGD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I also included this little leash extension because I wanted it to be a little bit longer: https://www.amazon.com/gp/product/B075XCQBVF/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

 

[BSw]

Picked her up yesterday, took off the top and bumper end caps, new antenna and break light as well as a set of ace rock rails

 

[TexasChick]

Added window tint, and a couple stickers.

 

[vilacr]

Installed kicker speakers all around along with an alpine sub woofer. Sounds so much better.

 

[tgoss]

Hey all

I installed last week, Mopar grab handles, Mopar steps guards, Mopar winch guard, ARB twin air compressor, ARB 50qt refrigerator, warn zeon platinum 10S winch with the Maximus 3 winch mounting bracket.
Took it off road on Saturday, got some rock rash, three tires made contact with the inner fender well.

This week I’ll be installing the Mopar 2” lift, Mopar beadlocking wheels with locking rings, Goodyear with Kevlar 35” tires, Mopar reinforced Tellgate bracket, high lift mount and jack, Baja design 10” high powered light bar, rugged radio uhf/vhf radio and CB.

I’ll start working on the overland rear cabinet system.
I have on order, gobi roof rack and Ikamper roof top tent, 40” Baja design high powered light bar and three 20” light bars. Gobi roof racks take forever to get once they are ordered, I ordered it well over a month ago.

Can you let me know how you anchored your fridge slide back there? I can't quite figure out how to do mine without fabbing up a false floor.

 

[James]

Did you get the M.O.R.E. bracket for the compressor. That is what I ordered.

Yes

 

[uudog]

Bartact Milspec seat covers installed in the front.

Dog seat cover for the rear.

Removed the carpet from the seating areas .

And my gun holster under the steering column.

Sorry for the picture bomb! Lol

Nice setup! What is the link for that particular dog seat cover?

 

[James]

Does the dual air compressor bracket get sandwiched between the body and the hardtop?

The bracket has a hole for the switch
Easy install, don’t run the wire through the floor grommet, use the one behind the glovebox.

 

[James]

Can you let me know how you anchored your fridge slide back there? I can't quite figure out how to do mine without fabbing up a false floor.

Hey
Right now it is not mounted, I’ll be making a custom overland cabinet set up out of aluminum.
I’m going to try and make some brackets and gas struts that will allow me to lift the entire cabinet up with the fridge up so I can still access the storage underneath it.
When I’m finished I’ll post some photos

 

[James]

Post some pictures of that VHF/UHF radio install. I'm looking for a nice place to install my dual band, 2m/70cm ham radio. There just doesn't seem to be a lot of good locations in the JL for a radio install.

I will when I get it installed. It has a date at the off road shop on Wednesday for lift and wheels

 

[Jeepmarkjl]

Couldn't wait to get home, so I installed this in the Home Depot parking lot (had to pick up a bigger drill bit so.....)

 

[Hydroboy35th]

new Magnaflow rock crawler exhaust!! sounds so good, and finally looks better, hate the looks of the stock exhaust

Do you have any videos of it running, looking to get this one or the AFE exhaust.

Sponsored