Wall Mount Door Hangers

[swflfireguy]

I use these: Ladder hangers , from ace Hardware. sturdy and I am able to anchor it into the block wall, I use them for all 4 doors.

Sponsored

 

[Buster1]

Hey bud. I got lucky and had many choices since that is outside load barring wall and windows so many studs to work with. Between front and rear doors the hangers are 40” apart (center bolt to center bolt), the space between rear doors is 33” c-to-c. Here is quick sketch lol

Thank you!!

 

[Chile1]

Hey bud. I got lucky and had many choices since that is outside load barring wall and windows so many studs to work with. Between front and rear doors the hangers are 40” apart (center bolt to center bolt), the space between rear doors is 33” c-to-c. Here is quick sketch lol

how many feet off the ground are your doors hanging. I'm looking to doing the same but will use a 2x6 stud to keep things level.

 

[hoag4147]

how many feet off the ground are your doors hanging. I'm looking to doing the same but will use a 2x6 stud to keep things level.

It is 6’ to the bottom of the ARC brackets. It is really preference on how high you want to mount along as they don’t touch floor. IMO, higher the better but they can be heavy.

 

[Chile1]

installed the ARC brackets this morning using the DIY tips provided on this thread. Thanks to hoag4147 and the others for the inspiration/ideas...

 

[hoag4147]

installed the ARC brackets this morning using the DIY tips provided on this thread. Thanks to hoag4147 and the others for the inspiration/ideas...

Look good . A tip on On using TLP. If it is an older version the bars on top are not open enough to miss the wider brace on JLs top (JKs were narrower). I cut mine because it didn’t set right in the rear. Also, if you can, leave back window open. It helps the top sit more level.

 

[Buster1]

What are your guys thought on going higher up for the 2x6 for the ARCs?

 

[Chile1]

What are your guys thought on going higher up for the 2x6 for the ARCs?

You mean like higher than 6ft or something else?

 

[hoag4147]

What are your guys thought on going higher up for the 2x6 for the ARCs?

No issue doing that. I almost used my back wall and did over/under. Two doors top and two directly underneath. Front doors can be heavy but not an issue. It truly is a preference thing

 

[Buster1]

You mean like higher than 6ft or something else?

Yeah. Like 7-8’ above the floor. Gets the doors a little higher and away from ‘the scratches zone.’

 

[Buster1]

No issue doing that. I almost used my back wall and did over/under. Two doors top and two directly underneath. Front doors can be heavy but not and issue. It truly is a preference thing

Thanks! Not too heavy to lift up it would seem.

 

[Chile1]

Yeah. Like 7-8’ above the floor. Gets the doors a little higher and away from ‘the scratches zone.’

i'm 6.2ft and 6ft is the sweet spot for hanging imho.

 

[macphisto13]

installed the ARC brackets this morning using the DIY tips provided on this thread. Thanks to hoag4147 and the others for the inspiration/ideas...

Dude... you're missing a door. Did your Jeep only come with 3?

 

[Chile1]

Yes it‘s a special addition and it came with 3…

 

[Zenmaster238]

installed the ARC brackets this morning using the DIY tips provided on this thread. Thanks to hoag4147 and the others for the inspiration/ideas...

how much space did you need between the brackets? looks good!

also... Chi Chi Chi Le Le Le Viva Chile!

Sponsored