Jeep Wick
Well-Known Member
This is happening with stock Rubicons. People have thrown on driveshafts, wheels, tires with no improvement.Vibrations from bent axles don't go away at speed, they typically just get worse. XR's have thicker axle tubes, and maybe better knuckles, nothing that would cause a vibration. I don't think there is any difference in the rotating parts, but don't quote me on that. If your vibration is constant, look at axles, defective/out of round rims, bad tires, bent or out of balance drive shaft. If you've lifted your jeep check pinion angles. If you removed or don't have FAD, check the front driveshaft.
Sponsored