Vector Offroad JL 2-Door Cargo Shelf

[Vector Offroad]

2 DOOR JL WRANGLER HIGHLAND PLATFORM $409.99

Installation video at the bottom of the link below.
https://vectoroffroad.com/collectio...products/jl-2-door-aluminum-highland-platform


Proudly Made in the U.S.A.

The Vector Offroad 2-Door Highland Platform practically doubles the usable space in the rear cargo area. It's a must for overlanders, campers, or serious grocery getters! This high strength solution is a perfect place to put gear for your next adventure.

The 2-Door Highland Platform provides the following benefits:

• Mounting hole patterns cut into the platform for RotoPax Water/Fuel/Storage mounts. The platform can hold up to two 4-gallon RotoPax containers on the underside of the deck
• Light weight Aluminum Construction, weight tested to 230 lbs without failure
• Bolt-in installation, requires no permanent modifications to the vehicle.
• Standard finish - Brushed aluminum main Deck, with Powder Coat Hammer tone Gray accent components
• Multiple lashing points for straps and/or cargo nets.
• Approximately 25" clearance from the floor to the bottom of the platform, and 16” clearance form Platform deck to the JL hardtop ceiling. 40” wide x 23” Deep inner dimensions.

Fits: 2018-Current Jeep Wrangler JL 2 door Hard Top or No Top only. Rear seat must be removed or laid down. The Highland Platform will not work with the rear seat in the upright position, or with a soft top.

**Product images may display optional accessories, configurations, or finishes. The actual product may vary slightly from what is shown. If you have any questions regarding what is included with a product, please contact us.

***As with all of our products the 2-Door Highland Platform is designed for off-road use only, compatibility with OEM systems has not been formally tested.

Sponsored

 

[Vector Offroad]

 

[Vector Offroad]

 

[Philly_]

Has anyone made this work with or tried to mount with the OEM two door soft top?

I know it requires using the same mounting location, but I was thinking of trying longer bolts and stacking the soft top brackets on top. I'm not sure if the added offset will be a problem or not.

Also, if this is possible, is there clearance to fully retract the OEM top?

 

[Vector Offroad]

We checked it when we had the soft top, and they don’t work together.

 

[Philly_]

We checked it when we had the soft top, and they don’t work together.

Bummer... I love how high this rack is off the cargo floor, but I switch tops seasonally.

I mostly need the clearance because I ratchet strap a Yeti 65 to the rear seat mounts (opening towards the front seat) so that I can get in and out of it quickly or fold the front seats forward and climb in for more complete access. Those things are ~100 pounds when full, so it typically doesn't move until I am back from the camping/off-roading trip.

Most other racks don't offer enough clearance to make getting in/out of the cooler realistic, and I don't see placing something that heavy higher than I have to as a good idea.

Sponsored