This remote start and Tazer Mini?

[kapk22]

The wife got me a remote start system for Christmas and I am trying to determine if I can install it without removing the Tazer Mini.

It’s an MPC Automotive. B-6001-000



STEP 2: Wiring
2.1 - Connect the Ignition T-Harness
Locate the Ignition cylinder module directly behind the dashboard at the ignition switch. Unplug the 6-pin plug located on the back of the module and plug it into the female end of the T-Harness. Then, plug the male end of the 6-pin plug from the T-Harness into the Ignition module in your vehicle as shown below. Make sure the plugs are tight and secure.

Sponsored

 

[Zeddy]

Kind of related but my Sahara has factory remote start but it does not work with the pin active in the tazer. I had hoped it was smart enough to know the difference between ign and remote start.
From what I have seen I would unmarry the Tazer then install your remote start and re-marry the tazer. There is a FAQ in the back of the Tazer installation instructions that talks about what accessories cause issues.