kapk22
Well-Known Member
- First Name
- Kasey
- Joined
- Apr 19, 2020
- Threads
- 169
- Messages
- 973
- Reaction score
- 433
- Location
- San Antonio Texas
- Vehicle(s)
- 1990 YJ, 2021 JLUR
- Thread starter
- #1
Figured I would post this separate from my other thread in here.
While installing a heigh10 last week I ran out of time and decided to finish the next day. My tazer mini was still connected and I had already disconnected the stock uconnect 7” display. At this point I had all the wires ran for the heigh10, but they were not connected. The only wire I had messed with on the system was the usb on the back of the center console. I had unplugged the original and plugged the new one from the stinger kit in. The other end was not plugged into anything yet.
So, I plugged the uconnect screen back in and the Jeep decided she didn’t want to play anymore.
The display asked for the anti theft code (which I finally got) and the dash said o needed to service the airbag, stability control, among other things.
Jeep won’t start now. I spoke with stinger and they told me the usb wire on the console was not the problem. They also said the tazer mini and heigh10 will not work together.
She suggested disconnecting the battery for at least thirty minutes with the tazer unmarried and removed.
This is the 2021 with the 2.0 and has the two batteries.
Any other ideas/thoughts/suggestions?
While installing a heigh10 last week I ran out of time and decided to finish the next day. My tazer mini was still connected and I had already disconnected the stock uconnect 7” display. At this point I had all the wires ran for the heigh10, but they were not connected. The only wire I had messed with on the system was the usb on the back of the center console. I had unplugged the original and plugged the new one from the stinger kit in. The other end was not plugged into anything yet.
So, I plugged the uconnect screen back in and the Jeep decided she didn’t want to play anymore.
The display asked for the anti theft code (which I finally got) and the dash said o needed to service the airbag, stability control, among other things.
Jeep won’t start now. I spoke with stinger and they told me the usb wire on the console was not the problem. They also said the tazer mini and heigh10 will not work together.
She suggested disconnecting the battery for at least thirty minutes with the tazer unmarried and removed.
This is the 2021 with the 2.0 and has the two batteries.
Any other ideas/thoughts/suggestions?
Sponsored