Tazer JL Turn Assist not functioning

[MrMischief]

I recently added a Tazer JL Mini to my 2019 Rubicon. The primary function I was after was changing tire sizes and the security PIN, those are working fine. However another feature I thought might be useful, or at least a party trick, was the turn assist feature, but I cannot get that to function. It will map to a button. I come to a complete stop, foot on the brake, turn the feature on, my dash says turn assist on, I then turn the wheel all the way one direction or the other, let off the brake and nothing happens. Tried it in 2wd, and 4 low. Is there a step that I"m missing? Other features programmed to buttons work, like cool down mode and winch mode, the only thing I've tested that appears to not function is the turn assist. My only other thought on it is that maybe it doesn't work with the two door for some strange reason, can anyone confirm that it works on their 2 door?

Sponsored

 

[mikem20]

Did you give it some throttle to get it to spin the outside tire?
it works on mine in 2wd. I just give it enough gas to spin that outside tire.

 

[DeeW]

You sure you’re doing it right? You have to do a couple of things all together to truly activate it, not just push the mapped button. It’s on like page 12 or 13 of the Tazer instructions. You have to turn the wheel lathe way toward the direction you want to turn, all the way, push the brake down, and hit the mapped button. Then it’s activated.

Sponsored