Suspension help

[Bm410]

Hoping to get some help here…



I have a 2018 JL 4 door, currently with a 2.5” RC spacer kit with the RC shocks( I know, not a good lift). Im looking at upgrading my front bumper to a heavier steel bumper and Im concerned about the extra weight sagging. This concern has got me wanting to replace the coil springs(with metalcloak or synergy) and shocks. Would this be a bad idea since I’m replacing parts and not necessarily buying a “lift kit”?. I don’t do hardly any off roading and this is my daily driver. Just want to improve ride quality and prevent any sagging.

Sponsored

 

[Hucke_250]

Do you currently have an adjustable front/ rear track bars and adjustable front lower control arms?

 

[Some Random Guy]

Hoping to get some help here…



I have a 2018 JL 4 door, currently with a 2.5” RC spacer kit with the RC shocks( I know, not a good lift). Im looking at upgrading my front bumper to a heavier steel bumper and Im concerned about the extra weight sagging. This concern has got me wanting to replace the coil springs(with metalcloak or synergy) and shocks. Would this be a bad idea since I’m replacing parts and not necessarily buying a “lift kit”?. I don’t do hardly any off roading and this is my daily driver. Just want to improve ride quality and prevent any sagging.

Not a bad idea, just look at other lift kits and match the spring/shock combos. Clayton Offroad marches fox or falcon, Rock Krawler springs are used with falcon shocks by Maximus-3’s lift. Those are just the 2 sets I’m familiar with.

 

[blnewt]

Could run a complete Rancho lift w/ shocks for about $750 @Northridge4x4 is a good vendor for us. Ted @wibornz runs these kits and wheels harder than most anyone around here
https://www.northridge4x4.com/fits/...port-lift-suspension-system-w-rs9000xl-shocks
If you get this kit I would get longer LCAs for sure and like @Hucke_250 mentioned, track bars would be a good plus too!

Sponsored