Solution for the rake on a Rubicon XR?

[Dystynkt]

Had my XR for a few months now and loving it, but the slight rake bothers me a bit. Thinking a 1" spacer up front would do it, but curious if anyone else has done anything about it.

Sponsored

 

[Dyolfknip74]

Had my XR for a few months now and loving it, but the slight rake bothers me a bit. Thinking a 1" spacer up front would do it, but curious if anyone else has done anything about it.

Google "rake+JLWranglerforum". There are a couple threads on this subject. XR has nothing to do with it.

 

[Dystynkt]

Google "rake+JLWranglerforum". There are a couple threads on this subject. XR has nothing to do with it.

Since the XR comes with the 1.5" lift already I didn't know if that would make a difference in the approach.

 

[Odyssey USA]

Load your camping gear, recovery gear, water etc in the back and it’ll be better if not nose up.

 

[TeraFlex]

Adding a '1 inch front spring level spacer like our kit part number #1155100 can be used to level it out. Nothing else is needed, I'll you'll have to do is adjust the drag link to re-center the steering wheel.

https://teraflex.com/jl-jt-ecodiesel-1-coil-spring-spacer-adjustment-kit-front.html

 

[Dystynkt]

Adding a '1 inch front spring level spacer like our kit part number #1155100 can be used to level it out. Nothing else is needed, I'll you'll have to do is adjust the drag link to re-center the steering wheel.

https://teraflex.com/jl-jt-ecodiesel-1-coil-spring-spacer-adjustment-kit-front.html

Awesome thanks

 

[firedude]

You might want to consider longer or adjustable control arms. At least front lowers. The xr lift already can use more caster. Check the axle is centered also.

Sponsored