Please help! Dying batteries and black u connect

[Katelyn47]

I tried connecting a front camera and the tazer mini and then my uconnect stopped working. Occasionally it will flash Jeep and then go black again but mostly its just constantly black. Then my batteries died. I've replaced the batteries and unmarried the tazer. Jeep immediately dead again. I have now completely charged both batteries twice, remarried, updated, and unmarried the tazer several times, and doing full reboots and sleep cycles each time. I've done soft and hard resets several times. I've check all the fuses several times. This has been going on for a month. I'm going crazy. What the hell is going on. Going to a dealership is not an option they didn't even know the jeep had a second battery.

Sponsored

 

[Bob Burd]

Assume you took the dash apart to connect the front camera to the u-connect radio? Did it stop working after reassembly, or did it work for a while? I'd suspect one of the connectors on the u-connect didn't go back correctly.

 

[Katelyn47]

It worked for a bit before the screen went black. I just took apart the dash again to check the connectors and it all seems correct.

 

[Bob Burd]

Try taking out the camera connection if you haven't already

Sponsored