Mopar lift with mopar beadlocks

[NO51]

Anyone have the 2 inch mopar lift and the mopar beadlock wheels ? And maybe running either a 35 inch tire or I was thinking of going with the 315/70 r17 c rated BFG ko2. Not sure what the offset on the beadlock mopar wheels are? Interested to see how they look with the mopar lift installed and if any has had any rubbing issues with this setup.

Sponsored

 

[mwilk012]

Anyone have the 2 inch mopar lift and the mopar beadlock wheels ? And maybe running either a 35 inch tire or I was thinking of going with the 315/70 r17 c rated BFG ko2. Not sure what the offset on the beadlock mopar wheels are? Interested to see how they look with the mopar lift installed and if any has had any rubbing issues with this setup.

There’s no way you’re rubbing with a 2+” lift and 315/70R17 C KO2’s. There should be lots of pics around on the forums if you search for it. They’re a fairly popular wheel. I don’t have a lift on my Rubicon and that’s the wheel and tire on mine, but I’m sure they’d rub under flex, just due to height.

 

[NO51]

There’s no way you’re rubbing with a 2+” lift and 315/70R17 C KO2’s. There should be lots of pics around on the forums if you search for it. They’re a fairly popular wheel. I don’t have a lift on my Rubicon and that’s the wheel and tire on mine, but I’m sure they’d rub under flex, just due to height.

What is the actual measure height of those tires bfg has them listed at 34.4 high and 12.4 wide I’ve heard they run a little smaller

 

[XJrider]

Do you have use for
The beadlocks? Or are you just want for show?

 

[mwilk012]

They do run quite small, I measured them right at 34” new.

 

[NO51]

Do you have use for
The beadlocks? Or are you just want for show?

I don’t have a need I have been looking at aftermarket and have only found a couple wheels I like most have an offset of -12 I like the look of the mopar wheel so was just considering them so was hoping I could see a few on some jeeps to see how the offset looks

 

[XJrider]

I don’t have a need I have been looking at aftermarket and have only found a couple wheels I like most have an offset of -12 I like the look of the mopar wheel so was just considering them so was hoping I could see a few on some jeeps to see how the offset looks

Ya was going to say no need for extra expense of
Beadlock if you arent airing down past 24 or so...

 

[mwilk012]

Ya was going to say no need for extra expense of
Beadlock if you arent airing down past 24 or so...

Well these wheels are “beadlock-ready” but you have to buy the beadlock ring separately. The silver ring that comes with it isn’t functional.

 

[stil2low]

Well these wheels are “beadlock-ready” but you have to buy the beadlock ring separately. The silver ring that comes with it isn’t functional.

A good buddy just realized that the dealer never set up his wheels with the additional lock ring lol. I was curious when he got them that they were using the torx screws instead of bolts, just figured mopar thinks they’d be enough haha
He still ran them at 6 psi and never lost a bead

 

[mwilk012]

A good buddy just realized that the dealer never set up his wheels with the additional lock ring lol. I was curious when he got them that they were using the torx screws instead of bolts, just figured mopar thinks they’d be enough haha
He still ran them at 6 psi and never lost a bead

Wow, that’s incredible. The wheels are fairly narrow, so that probably helps hold what is typically a 12+” wide tire on the bead.

 

[NO51]

anyone have these wheels on a sport or sahara wanted to see how the offset looks

 

[JLJoy]

If anyone has these and likes the wider stance, I have 18x10 Fuel Trophy with the new Cooper XLT AT3 tires and would love to trade. Really like the tires, but don't care for how far the wheels stick out. In the Wichita area if anyone would like to look at them.

 

[offcamber]

I've had them since March. Love them work great with my 37x13.5 STT Pros down to about 10psi. I have the lock rings but haveint gotten around to installing them. Painted them and just don't seem to find the time to switch them.

 

[NO51]

I've had them since March. Love them work great with my 37x13.5 STT Pros down to about 10psi. I have the lock rings but haveint gotten around to installing them. Painted them and just don't seem to find the time to switch them.

Do you have a pic showing where the tires sit with the fender ?

 

[offcamber]

Sponsored