Sponsored

Mopar 2" Lift Instructions Contain Numerous Errors

Waiting

Well-Known Member
First Name
Keith
Joined
Jul 24, 2017
Threads
14
Messages
460
Reaction score
579
Location
Baltimore
Vehicle(s)
2018 2-Door Rubicon, 3.6L, 8-spd auto
I have some questions about the instructions (specifically for the 2-door) I pulled from Quadratec's website about which springs go on which corner. Page 1 shows a spring part E 2x, labeled front and spring part F 2x labeled rear. This seems to suggest two of same springs for the front and an another matching set for the rear.
However, the 'Part Reference' on page 2 shows 1 - LF (left front?) labeled 'E' with a part number *69AA, 1 - RF (right front?) labeled 'F' with a part number *71AA. If I'm reading this correctly the front springs a labeled with an E and an F, which contradicts page 1. What am I missing?
 

ocrejects

Well-Known Member
First Name
Rick
Joined
Dec 20, 2017
Threads
1
Messages
590
Reaction score
292
Location
Orange County, CA
Vehicle(s)
2021 Rubicon, 2018 JLU Rubicon, 2018 Tiguan SE
I have some questions about the instructions (specifically for the 2-door) I pulled from Quadratec's website about which springs go on which corner. Page 1 shows a spring part E 2x, labeled front and spring part F 2x labeled rear. This seems to suggest two of same springs for the front and an another matching set for the rear.
However, the 'Part Reference' on page 2 shows 1 - LF (left front?) labeled 'E' with a part number *69AA, 1 - RF (right front?) labeled 'F' with a part number *71AA. If I'm reading this correctly the front springs a labeled with an E and an F, which contradicts page 1. What am I missing?
Your front springs will obviously be the taller ones driver side will be the red tag the passenger will be a blue tag for the front. Same goes for the back. Red driver side and blue passenger side
 

unsavory

Well-Known Member
First Name
Jimmy
Joined
Sep 17, 2018
Threads
27
Messages
608
Reaction score
816
Location
California
Vehicle(s)
2022 JLUR XR 2.0T Auto, 2019 JLUR V6 Manual (sold)
Reading this thread makes my head spin. I can understand why the instructions for a Chinese made bunk bed I ordered off of Amazon might be unintelligible. But this is an American car! At least it's supposed to be.

There's no excuse for this.
 

Sponsored

higehunter

New Member
Joined
Jan 25, 2026
Threads
0
Messages
4
Reaction score
0
Location
Tokyo
Vehicle(s)
2018 JL Rubicon 3.6 > 2026 JL Rubicon 2.0
I purchased a used Moper 2-inch lift kit. The manual that came with it is dated December 1, 2020. I'm unsure whether the spring isolators that came with it are for the 2-inch lift kit, or are they the original ones that came with the vehicle. If anyone knows, please let me know. The part numbers on the part are 68427380AA and 68342250AC. Personally, I think the ones that come with the kit are a lighter gray.
If the ones in the picture are not for the 2-inch lift kit, could you please let me know the correct part number so I can order?

Jeep Wrangler JL Mopar 2" Lift Instructions Contain Numerous Errors IMG_3158
 

GSS

Member
Joined
Jun 18, 2025
Threads
1
Messages
16
Reaction score
24
Location
Minnesota
Vehicle(s)
2025 JLURX Granite, 2025 JLURX Red, 1945 Wiilys MB, 1942 Willys “Slat Grill” MB
These are the correct ones for the latest 2” kit. Same numbers as are present in the kit with the Bilstein shocks. Hope this helps. Thanks.
 

higehunter

New Member
Joined
Jan 25, 2026
Threads
0
Messages
4
Reaction score
0
Location
Tokyo
Vehicle(s)
2018 JL Rubicon 3.6 > 2026 JL Rubicon 2.0
GSS、投稿: 3371944、メンバー: 115237 said:
これらは最新の2インチキット用の正しい番号です。ビルシュタインショックのキットに記載されている番号と同じです。お役に立てれば幸いです。ありがとうございます。
[/引用]
ありがとうございます。正しい部品が揃っていることがわかって安心しました。
Sponsored

 
 







Top