Sponsored

MLC 6 Issue

Hurri

New Member
Joined
Mar 18, 2020
Threads
1
Messages
1
Reaction score
0
Location
NJ
Vehicle(s)
2020 JLU - Willys
Hi All,

First time poster, long time follower of the forums. This community has been awesome from the initial research I did in purchasing my jeep through every single mod I've added, so thank you!

I've run into a mod issue that I can't figure out... I've recently installed the RC MLC6 aux switches. The kit itself is fantastic and looks stock at the bottom of the center console. My issue is I recently hooked up halos to one of the switches and every time the autostop engages it flicks off power to the MLC6 for about 5 seconds when the engine restarts. I can verify I'm losing power to it because the LED on the switch turns off then back on once the engine reengages. If I turn off autostop, everything works great.

I haven't been successful reaching their support through the company's website, so I'm turning to you all. Any input or suggestions to try? I double checked to make sure everything was installed correctly and I believe I wired it properly, but maybe there's something I'm missing.

Thanks in advance!
Sponsored

 
 







Top