JL Rubicon on Method Wheels...let's see em!

[TopWright]

2019 w/2.5" JKS Konnect lift, 35" Falken's and Method 703 Bead Grip wheels.. Tires and wheels purchased at Discount Tire and installed with new TPMS. Couldnt have asked for better service.

Sponsored

 

[ellunchboxo]

I bought my lug nuts direct from Method and they are the spline type, but I do not remember the brand. I had Gorilla in the past and they were fine, but the finish on whatever I got from Method seems to be holding up better.

Same here. No issues.

 

[TopWright]

Gents just got my method wheels/tires this week, and I am anxious to get them fitted, however they came with standard hex lug nuts. Can anyone suggest a good locking lug nut that fits these wheels, or are most using the splined type Gorilla lugs, and leaving it at that ?
Thanks in advance for all replies

I went with these for my Method 703 Bead Grips: https://www.amazon.com/dp/B08DR9Q996?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[MrWaxman]

Gents just got my method wheels/tires this week, and I am anxious to get them fitted, however they came with standard hex lug nuts. Can anyone suggest a good locking lug nut that fits these wheels, or are most using the splined type Gorilla lugs, and leaving it at that ?
Thanks in advance for all replies

4wheelparts has procomp lugs that are exactly the same as the method but cheaper and will include lugs for the spare.

 

[Magredvet]

Finally got them fitted, with some splined wheel lugs from Amazon.
Method 702 8.5x17 0 offset with BFG K02 315/70R17. Couldn't help but take this photo when the spare was standing next to my SRT6.......

 

[willieself]

703 Gloss Titanium 17x8.5 with 0/4.75 wrapped in 35x12.5R17 Nitto Ridge Grapplers

 

[ellunchboxo]

Looking for people to post up their Method Racing Wheel setups on the new JL
Let's get some Spec's on the setup too.

Tires | Rim's | Offest | Backspacing

Not a Rubi but a Willys

Method 701 Bronze with 35" KM3

 

[Rubi II]

Black 703’s 0 offset with BFG KO2’s 315/7017. Wish I had done it sooner!

 

[Candyx]

17x9 MR319 -12mm offset with 35's

 

[TopWright]

Method 703 bead grips w/35's. JKS 2 1/2" lift.

 

[ellunchboxo]

Mopar 2”

 

[TyRoosevelt]

Has anyone installed 0 or 25 offset on the mopar hinge reinforcement carrier? For the xtreme recon package, I am wondering if there is any interference with the longer tailgate bump stop or if the tire goes right up against it.

Also, any clearance issues going from the 12 offset of the xr wheels to the 25 in terms of suspension?

 

[Notgeowild]

 

[TyRoosevelt]

Do you have 0 or 25? Do you still have the mopar carrier? Does it butt up against the tire isolators?

Sponsored