Jeep OEM Tool Kit

[calemasters]

I did not open the Jeep tool kit (in the small black pouch) until today. This is the tools for removing the roof, doors, and laying down the windshield. The torx T-50 bit was missing. My kit contained the small ratchet, T-40 torx and a 15 mm socket. I assume the T-50 bit was suppose to be included in the kit as well.

Is this correct that the T-50 torx should have been included?

Sponsored

 

[JeepU4IA]

Yes, and that's the most useful piece. That bit is about 4 inches long and hard to find separately. Here is one you can use with a standard 3/8" drive ratchet:

https://www.homedepot.com/p/Capri-Tools-3-8-in-Drive-Long-T50-Star-Bit-Socket-3-0602/305590149

 

[calemasters]

Yes, and that's the most useful piece. That bit is about 4 inches long and hard to find separately. Here is one you can use with a standard 3/8" drive ratchet:

https://www.homedepot.com/p/Capri-Tools-3-8-in-Drive-Long-T50-Star-Bit-Socket-3-0602/305590149

Thanks Rod.

Sponsored