Sponsored

HELP! Broken Tailgate Hinge Bolt

GreenAustin37

New Member
First Name
Bryan
Joined
Aug 20, 2020
Threads
1
Messages
2
Reaction score
0
Location
Austin, Texas
Vehicle(s)
2019 JL 4 door
Needing some suggestions on what to do about this broken hinge bolt. Tried an extractor, and ended up snapping the bolt itself off. It's been suggested I should drill it out. Would I be better off removing the plastic on the other side and trying to get it out that way? How would that work?

Thanks in advance for your help. 2019 Wrangler Unlimited Sport.

Jeep Wrangler JL HELP!  Broken Tailgate Hinge Bolt IMG_4346


Jeep Wrangler JL HELP!  Broken Tailgate Hinge Bolt IMG_4347
Sponsored

 

XJfanatic

Well-Known Member
First Name
Brian
Joined
Mar 14, 2021
Threads
35
Messages
980
Reaction score
2,208
Location
El Paso, Tx
Vehicle(s)
2020 JLU, 2020 JT, 2000 TJ
Build Thread
Link
Haven’t taken the gate apart but if you can reach it from the inside with vice grips it may be the best bet. The heat from the drilling may have loosened it up.
 
OP
OP
GreenAustin37

GreenAustin37

New Member
First Name
Bryan
Joined
Aug 20, 2020
Threads
1
Messages
2
Reaction score
0
Location
Austin, Texas
Vehicle(s)
2019 JL 4 door
If that's possible that'd be great, Not sure though as it's a little unclear from the photos I see online of the other side of the gate with the plastic piece off if there's something there I can use to get it out like that. Hoping someone can provide some more info before I go pulling that off later ;)
 

cjaama

Well-Known Member
Joined
Sep 24, 2018
Threads
17
Messages
398
Reaction score
336
Location
Albany, NY
Vehicle(s)
2019 JLUR
Is it on the tailgate or body side of the hinge? Either way, take the plastic off and see if you're dealing with a blind or through hole and re-evaluate.
There's plenty of options out there. You can certainly still use an easy out on a snapped bolt.
 

chevymitchell

Well-Known Member
First Name
Shawn
Joined
Feb 18, 2018
Threads
112
Messages
5,017
Reaction score
12,147
Location
Pueblo West, CO
Vehicle(s)
2022 392XR, 2025 Wagoneer S, 2006 LJ 6-spd
Occupation
Avi Engineer
Needing some suggestions on what to do about this broken hinge bolt. Tried an extractor, and ended up snapping the bolt itself off. It's been suggested I should drill it out. Would I be better off removing the plastic on the other side and trying to get it out that way? How would that work?

Thanks in advance for your help. 2019 Wrangler Unlimited Sport.

IMG_4346.jpg


IMG_4347.jpg
Take the plastic off the inside of the tailgate. There's a plate held into place by two of those bolts. You'll be able to get that off and work the remaining portion out or order a new plate and new bolts. It's not as bad as it seems.
Sponsored

 
 







Top