Sponsored
melendez69
Well-Known Member
I don' t know the bolt or thread size, but you can get them from Mopar if you PM them. Benny's pretty responsive.
Hopefully someone from the forum will know the size.
https://parts.moparonlineparts.com/...-components-front-scat/?part_number=6507649aa
Edit: also just noticed you also have this on a 'bumper bolts' thrread.
Hopefully someone from the forum will know the size.
https://parts.moparonlineparts.com/...-components-front-scat/?part_number=6507649aa
Edit: also just noticed you also have this on a 'bumper bolts' thrread.
RockyMtnHigh
Well-Known Member
There are 4 M8x1.25 bolts (Grade 10.9), on the inside and outside of the frame rails. The other 8 bolts that hold it on (attached by the tow hooks) I'm not sure about. I think they're larger than the others, probably M12.
Edit: I just realized the M8's I was talking about were made for the winch plate mount. The ones for the bumper came off with a 16mm socket, which points toward an M10 bolt. 18mm socket for the other 8, which suggests an M12 bolt. There's no exact measurement, but it's a good indicator.
Edit: I just realized the M8's I was talking about were made for the winch plate mount. The ones for the bumper came off with a 16mm socket, which points toward an M10 bolt. 18mm socket for the other 8, which suggests an M12 bolt. There's no exact measurement, but it's a good indicator.
Last edited:
mintswitch
Active Member
I know this is an old thread but just in case this helps anyone out while searching... I just got done mounting an aftermarket winch plate and the bolts used for the frame rails where the winch plate mounts to are M10x1.5 grade 10.9.
yingsuhuaqi
New Member
May I ask how long is it? I can find some M10*1.5 GRADE 10.9. But I dont know how long it should be. Thank you!
Sponsored
