DIY stubby front bumper project

[svc707]

I was getting anxious so I had to weld it already and throw some rustoleum bed liner rattle can on it.

Sponsored

 

[svc707]

Not the best video since the park is at an upslope. These are the @Diode Dynamics SS3 Pro SAE fog lenses. I haven’t wired the aux switches to power the other lights yet.

 

[svc707]

Time consuming , yes. The rewarding result worth everything. Made my own harness for the top lights with backlit feature. All wires soldered. Heatshrink sealed sleeves and wrapped in expandable sleeve for a final completed look.

 

[svc707]

All is good! Will test it out tonight and find an open field/road

So many different combinations of which lights to run. Top backlit will probably be tan all night every night.
Still need to figure out my mounts for the pillar lights.

 

[svc707]

Welded up the shackle mounts. Threw some paint on it. And it’s coming to life.

 

[svc707]

Shackle mounts

 

[svc707]

Picture in daylight. I also installed the Diode Dynamics Elite Max headlights this morning

 

[Florida Man]

Welded up the shackle mounts. Threw some paint on it. And it’s coming to life.

Where did you get those plates?

 

[svc707]

Where did you get those plates?

I make them

 

[Florida Man]

I make them

Do you happen to also sell them?

 

[Starboard M]

Evo makes a pair, you can find it cheaper from the distributors.
https://evomfg.com/products/front-d-ring-mounts-black-jl-jt

 

[svc707]

Do you happen to also sell them?

Yes, But i dont have any 3/8" sheets right now. I can cut thicker too but i dont have 1/2" material either.

 

[thance]

Looked a little rough in the beginning, but looks great now! Reminds me of my EVO

Sponsored