Baer 6t-13.5"

[Eleven71Design]

So this Baer kit has been out a while with no info on here that my searches show.
I did the test fit print out and checked my 22-392 XR wheels and it looks like it clears with only the very inner corner of the print out showing a little less clearance than they recommend. The printout has 1/4" clearance around the top of the caliper. I show 3/16" clearance at the caliper top corner closest to the wheel face. I confirmed dimensions on the printout with calipers.

Not a 14" rotor but 13.5" with 6 pistons seems like a great option especially if wanting to keep my older XR wheels.

Anyone with info on this kit?

Sponsored

 

[y2kcbr600]

I was just looking at options too. That dessert tan caliper though!

 

[Eleven71Design]

Just re did the test print/fit. Printed out and cut to spec. Same spot shows a little less clearance than recommended. Even with wheel weights on it does not have any issues. So, Factory XR wheels appear to be good to go with this kit. Plan to upgrade.

Sponsored