AFE Exhaust

[Gorilla57]

Anyone running the MACH Force-Xp Hi-Tuck 3" 409 Stainless Steel Axle-Back Exhaust System (49-48080)? Sound clips sound pretty quiet and close to stock. Any issues running a 3" pipe? I remember folks saying a 3" pipe was not necessary for a JK, not sure if there are any concerns with the JL?

https://afepower.com/afe-power-49-4...-409-stainless-steel-axle-back-exhaust-system

I had the dynomax muffler elimination pipe, but it was too loud for my preference. I ran an AFE hi tuck 2.5 axle back on my JKU and was pretty happy with it.

I’m running the AFe 2.5” cat back hi-tuck WITH the 3” axle back you have linked. I had a bit of drone @ 3000rpm and that’s right at the normal shift points in the 8spd. So, took off the tailpipe section and added the 3” muffler setup. Love it. It’s tucked up plenty high compared to the stock suitcase of a muffler.

Sponsored

 

[SHYUperman]

I’m running the AFe 2.5” cat back hi-tuck WITH the 3” axle back you have linked. I had a bit of drone @ 3000rpm and that’s right at the normal shift points in the 8spd. So, took off the tailpipe section and added the 3” muffler setup. Love it. It’s tucked up plenty high compared to the stock suitcase of a muffler.

Do you have any pics of your setup?

 

[Gorilla57]

Do you have any pics of your setup?

Nope, but if I get a chance today, I can take a couple.

 

[Gorilla57]

here ya go.

 

[Jimac]

here ya go.

Here is my OKIE low cost good sounding special

 

[offcamber]

I've been running the RB 3" for about 6 months now. I love the sound of it and no muffler to drag over the rocks!

 

[Jeepin_Donnie]

Anyone running the MACH Force-Xp Hi-Tuck 3" 409 Stainless Steel Axle-Back Exhaust System (49-48080)? Sound clips sound pretty quiet and close to stock. Any issues running a 3" pipe? I remember folks saying a 3" pipe was not necessary for a JK, not sure if there are any concerns with the JL?

https://afepower.com/afe-power-49-4...-409-stainless-steel-axle-back-exhaust-system

I had the dynomax muffler elimination pipe, but it was too loud for my preference. I ran an AFE hi tuck 2.5 axle back on my JKU and was pretty happy with it.

Dan, did you end up purchasing/installing this?

 

[SHYUperman]

Dan, did you end up purchasing/installing this?

No, is this next on your list?

 

[Jeepin_Donnie]

No, is this next on your list?

I want to find a high tuck exhaust that is a little bit louder than stock. You buy and install first so I can hear it!

 

[SHYUperman]

I want to find a high tuck exhaust that is a little bit louder than stock. You buy and install first so I can hear it!

Haha I did that with the dynomax muffler delete.... and it was too loud... your turn

Sponsored