3D Printed Brake Light Relocation Bracket

[menerso]

I just posted a model for relocating your 3rd Brake Light to the center of your stock tire carrier on the JL's. I tried some of the ones but they all required an allen key or different size socket than the lug nuts. I liked the Teraflex one, but you had to buy a whole tire carrier to get it. This one you can print yourself and use a T40 bolt so the Jeep Toolkit will suffice to remove. Once removed, just unplug the light and the spare comes off.

https://makerworld.com/en/models/2600338-jeep-jl-3rd-brake-lite-relocation-mount

Sponsored

 

[jadmt]

very nice..you could sell these.

 

[AA_Jeeper]

What material did you print it from? Hopefully not PLA.

 

[menerso]

What material did you print it from? Hopefully not PLA.

I currently have it printed in PC. ASA Carbon Fiber is what is shown in the pictures. Yes, No PLA and NO Petg. ASA, Nylon, PC are recommended. ABS may work ok, but I would lean towards ASA then.

 

[menerso]

very nice..you could sell these.

Yes, I can very easily sell these. I have a batch of T40 bolts and nuts. If anyone wants one, I figure something like $20 plus shipping. It would include the bracket, a T40 bolt and a nylon nut.

Send a DM if you want one. I could take PayPal.

 

[Omen]

Nice work and thanks for sharing it! It looks well designed and compact.

 

[menerso]

Nice work and thanks for sharing it! It looks well designed and compact.

Thanks. It may not work for every wheel out there, but it would be easy to modify to fit by just remodeling it and re-printing.

Sponsored