2020 JLUR Build "Experiment 626"

[Huskiesrideshotgun]

Hello and thank you for taking a stop and checking out my build.

This is my 2020 JLUR 3.6L Bikini Pearl Experiment 626 Build.
Been a member popping in and checking things out but not really doing anything but looking. Really started checking back in regularly and posting for a few weeks now.

But about the Build
She is currently sitting at just over 110,000 miles. Other than a few sensors and general maintenance, no major issues. No cam, no rocker, no head issues. I was chasing a check engine night but found it to be a bad New coil pack and a low voltage issue from the battery. But with 110,000 miles she will be getting a new motor within the next few weeks to keep her reliable. I have no plans of giving up or selling this build. I will be posting up as I go with the progress and what I'll adding and doing with the mods as we go.

As for today she got 2 new parts added to her.

1st is the DV8 Offroad Digital Device Dash Mount.
I like it alot. So many different locations at mount accessories its crazy. And not just all bunched together. You can really spread them out on this mount.

And the 2nd is the Excessive Industries Spare Tire Delete, Tailgate Vent Plate Kit with Camera Mount, Hardware and License Plate Bracket, Dual Tabs
Dual Tabs mean that there is a tap both on the right side of the bracket ( 1 hole for accessories) and a tap on the left side of the bracket ( 2 holes for accessories). I went with the Dual Tabs cause I will be mounting a set of reverse/chase lights with a wip or antenna off the top of it.

A few pictures of both before and after.

Sponsored

 

[Huskiesrideshotgun]

Soft rendering. Color will still be Bikini Pearl but its going to get a top coat of matte clear. Yes yes i know that will kill the flake. But for the look I want its what has to happen and im all for it.

 

[Huskiesrideshotgun]

A bit of an update as to what is installed as of now and how I feel about it;


Dirty Life Wheels

ROADKILL 9302 - Beadlock Satin Black w/ Black Beadlock 17 x 9 -38

Wide Poke! I love the look, the offset is wide and crazy. I'm so happy I went with the -38! The only thing I would change is an Aluminum Ring instead of the black color matched ring. I will be switching them up when I order my spare once I have my spare mount completed.



Fury Tires

Country Hunter M/T II 37 x 13.5 x 17

Very happy with the Fury tires so far, No complaints. Have had them on pavement, dirt, mud and rain. Only thing they haven't seen as of yet for N.E. weather is snow (yes I drive in the snow), so time will tell. Will keep updates on all weather.



Rough Country (RC)

N3 Steering Stabilizer
LED Ditch Light Kit Bk Series w/Amber DRL
LED Hood Kit Bk Series
Inner Fenders Front and Rear
8 Gang Switch Panel NON Bluetooth, RGB. Backlit Buttons, Multifunction Modes


Overall, I am very happy with all parts and accessories installed from RC. I know, I know, RCs are cheap parts. I have absolutely no complaints with RC. They all do the job that they are intended for, lights light, Gang Switch switches things on and off (Bluetooth would be cool but im fine without it). You can really dial in the color for the backlit color. I wish I would have upgraded for the better V2's on the steering stabilizer, but again future mod.



DV8

Device Dash Mount V1

Fantastic dash accessory dash mount! Can't say enough about this mount. So many locations to pick from, so Many! It took less than 30 minutes from start to finish to install. No instructions but pretty self explanatory. 2 brackets in the stock location using factory hardware and DV8 provided all other hardware needed to complete. Again great accessory mount for all of your accessory needs, and I mean ALL!



Excessive Industries

Tailgate Plate Kit with Camera Mount, License Plate Bracket and Dual Tabs

Came in raw metal with No burs, only had to take a file to a few spots. I am very happy with my purchase. Looks super clean with their 3 pc design. Easy to assemble and finish. It came with instructions on how to install the cam with a clear-cut picture of how and where everything went together. If I did it again I would definitely order their kit again or recommend this kit if you are going the delete way and I Do!


LOD

Signature Series Rock Sliders

The Lod signature series are frame mounted and they do their job, and do it well! They have taken a really good beating sense I installed them. They bolt directly to the frame and I did the drill and mount option too. The step is okay for the little ones but not really a step, step, but a step with a slider is not what I was looking for, but it works as a step non the less. I was looking for something that could take a beating and keep going, and this is it. I had them finished by LOD in their black with red aluminum plates.



Mopar

Tube Doors
Floor Mats

Mopar parts do what mopar parts do. But stay tuned for tube door mod.


Motobuit

Front Fender Chop Support Brackets w/two pair LED side

I went with the Motobuit fender chop for a few different reasons this time. My last build had the DRL chop kit, with smoked black DRL, sequential turns and amber drl. While I like the look, I didn't like the overall install of the manufacturer that I went with. Having to adjust the mounts a few times and then the fenders just started to flop around with no way to stop it other than their mount. With Motobilt to make it 100% secure you have to drill into the fender but I 100% like this better. The fender is not going anywhere while doing 70mph going down the highway. It also has provisions to attach and hide the wiring. The lights that they provide while small are mighty, so I went with the 2/pair option (4 lights total) 2 to face forward and 2 to face left and right (for legal purpose). And I would have to say, this chop kit is probably 70% to 80% of all the conversation starters with my build other than the 37's (most builds or jeeps are olny running 35's up here).



Smittybilt Winch

Smittybilt X20 Winch

What can I say, it winches lol. Overall I am very happy with the Smittybilt X20. The wireless remote has always connected on the first try. I went with the steel cable to start with but will be upgrading to the Synthetic Rope here shortly and a new Hawse Fairlead. Should have just done it right the 1st time. Not sure yet what/who's fairlead i will be going with but ill keep the build page updated.


And a few Amazon parts here and there like storage, sunshade, mirrors, etc....

 

[Roky]

LOD

Signature Series Rock Sliders

The Lod signature series are frame mounted and they do their job, and do it well! They have taken a really good beating sense I installed them. They bolt directly to the frame and I did the drill and mount option too. The step is okay for the little ones but not really a step, step, but a step with a slider is not what I was looking for, but it works as a step non the less. I was looking for something that could take a beating and keep going, and this is it. I had them finished by LOD in their black with red aluminum plates.

Build is looking good brother….. love me some LOD, I’m wrapped all the way around, bumpers and sliders.. great company, great product…..Could I trouble you with a pic of your red aluminum plates ? Thanks..

 

[Huskiesrideshotgun]

Yeah I can get a few pics of them. I just looked on my cam roll and dont really have any great shots of them. But ill take a few tomorrow and post them up.

Sponsored