What did you do TO your Jeep JL today?

[barongan]

Change the front and rear tires

Sponsored

 

[BostonBilly]

Finished my lift install and added the trackbar stiffener.

 

[Rad vlad]

Small projects
Clear side markers and under hood lighting

 

[OMTBiker]

Technically yesterday and today, removed the Sahara steps and installed Mopar Performance Rock Rails. Washed Beast after the long drive to pickup the rails.

 

[MALL R8D]

How do you like it? What are the pros and cons of the top?

I have had the Sunrider since last year. I absolutely love it. I use it far more than I used the freedom panels. It can be opened or closed from the driver's seat in a matter of seconds, and you don't take up cargo space like you do with the panels

 

[Hibypass]

What antenna mount is that? And are you worried about any interference with the AM/FM antenna?

The mount is a CP-5NMO. The two radios transmit and receive at different enough frequencies that interference isn’t a problem.

 

[Roky]

When I got home from work today the wife had me all set up for the install....

The install is pretty straight forward, good instructions. You have to download them off the computer.... I never thought I’d see the day they didn’t put instructions in the box, but I guess that’s the word we live in now.

You definitely need an extra pair of hands in a couple of the steps. The hardest part of the whole install is mounting the spare tighten lugs, push it against the tire carrier mark where the bracket is, then take the tire back off, tighten bracket, then lift that heavy ass tire again.... .

The older post of this install I read had the third brake light mounted behind the rim, now it’s mounted over the camera housing. The wee little torx screws holding the camera ended up being to short with the brake light bracket mounted so I had to round up some longer ones.

@Moto_21 the carrier weighs 50 lbs. And I’m not sure, but I think this hole looks like a spot for a cb antenna, and there’s a couple threaded holes I think for rotopax or high lift jack bracket and such.

All in all, I’m really happy with the way it turned out, I’ll post after I hit the trail to see if the rattles gone. I’m guessing it is because I used to be able lift the tailgate and recreate the noise , now I can’t......

 

[Moto_21]

When I got home from work today the wife had me all set up for the install....

The install is pretty straight forward, good instructions. You have to download them off the computer.... I never thought I’d see the day they didn’t put instructions in the box, but I guess that’s the word we live in now.

You definitely need an extra pair of hands in a couple of the steps. The hardest part of the whole install is mounting the spare tighten lugs, push it against the tire carrier mark where the bracket is, then take the tire back off, tighten bracket, then lift that heavy ass tire again.... .

The older post of this install I read had the third brake light mounted behind the rim, now it’s mounted over the camera housing. The wee little torx screws holding the camera ended up being to short with the brake light bracket mounted so I had to round up some longer ones.

@Moto_21 the carrier weighs 50 lbs. And I’m not sure, but I think this hole looks like a spot for a cb antenna, and there’s a couple threaded holes I think for rotopax or high lift jack bracket and such.

All in all, I’m really happy with the way it turned out, I’ll post after I hit the trail to see if the rattles gone. I’m guessing it is because I used to be able lift the tailgate and recreate the noise , now I can’t......

Your wife is awesome. Mine would throw it away haha. I like it, sleek looking. Looks good man

 

[SSBattalion]

Artec Industries fender chop kit put on.

 

[Roky]

Your wife is awesome. Mine would throw it away haha. I like it, sleek looking. Looks good man

Thanks brother... yeah I got a pretty good ole lady.

 

[Roky]

Artec Industries fender chop kit put on.

Looks great dude, do you still have DRL ? I see the little light on the side, assuming that’s the turn signal? Could you post picture with lights on?

 

[melendez69]

I finally managed to get the front LCA bolts off, and the RH skids on. @mikej , I'm not sure if you gave up, but to get them front bolts off, all it took was a spritz of B'laster. Off they go.

https://www.amazon.com/gp/product/B003V5JT26/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Let it sit for a few minutes, and...

 

[JeepNut80]

Installed the E-cowlboy tailgate table in my ‘20 JLUR. Very easy install and nice quality for less than half the price of the mopar table.

 

[landshark99]

Small item installed this new style fire extinguisher, it is the size of a road flare, starve the fire with gas, lasts longer than a normal 20lb fire extinguisher, weighs almost nothing, last a long time, does not make a mess but it is one time use and thrown away.

 

[Pressuregarage]

Finally got rid of this White interior.
Made a Make shift, Hardtop rig with some D-rings and tie straps.
Prepped and taped off the possible oversrpray areas along with the Velcro that holds the factory headliner.
Just waiting on it to dry to put it all back together!!!
I love how it came out!
Now “Denzel” is marching inside and out!

My Paint prep helper...

Masked off

Side by side...

Before:

After:

Sponsored