What did you do TO your Jeep JL today?

[bem1]

Thank you, that will he the deciding factor of me buying it.

Per their website: "Once installed the JL4D never needs to be removed and works perfectly with your Hard or Soft top JL Wrangler."

Also, found this YT video of a guy putting his top back on:

Sponsored

 

[TXRobD]

Thank you, that will he the deciding factor of me buying it.

Hard top does fit over the Spiderweb Shade. I installed mine and it just stays on all the time. When the hardtop is on it blocks out the white and looks like you have a headliner. I can't say about the soft top because I don't have one. You have to order the one for a hard top. There will be a cutout for the freedom panels to lock in place. If you only have a soft top you can get one without the cutout.

 

[Tritonman]

Any feedback?

I hit the trails a weekend or so ago and they seemed to do their job. The trails we went on were not overly hard so they didn't really get put to the test. Im hitting Rausch Creek next weekend for 4 days and the true test will be there. Currently im having some angle issues on the passenger side link which seems to be causing what appears to be binding on the joint ends. I need to find the time to stop by Rock Krawler and have them look at it to make sure its ok. Driver side freely moves while the passenger side is very tight with minimal movement on the ends.

 

[Tritonman]

Hard top does fit over the Spiderweb Shade. I installed mine and it just stays on all the time. When the hardtop is on it blocks out the white and looks like you have a headliner. I can't say about the soft top because I don't have one. You have to order the one for a hard top. There will be a cutout for the freedom panels to lock in place. If you only have a soft top you can get one without the cutout.

I do like the idea of the headliner look. I have both soft top and hard top.

 

[mlebofsky]

I hit the trails a weekend or so ago and they seemed to do their job. The trails we went on were not overly hard so they didn't really get put to the test. Im hitting Rausch Creek next weekend for 4 days and the true test will be there. Currently im having some angle issues on the passenger side link which seems to be causing what appears to be binding on the joint ends. I need to find the time to stop by Rock Krawler and have them look at it to make sure its ok. Driver side freely moves while the passenger side is very tight with minimal movement on the ends.

Thanks
I'm surprised the OEM hasn't put out "improvement numbers" with varying lift heights.

 

[Frontal]

Got rid of the nasty Euro bumper and added a Warn Elite along with a Warn Tabor 10.5.

At the same time I fitted a Front Runner roof rack.

 

[LailaiJl]

Thanks for the insight. I wonder if your case is isolated? I wonder why for you/some Rubicons, the full height is not achieved? Hmmmm.

I have a Sahara, so maybe it would be a full height for me?

Also - if not Dynatrac, then which kit would you recommend for a mild 2” lift, with hardly/if at all, off-road use?



I love that ARB bumper. One of the few non-OEM that I’ve seen that I like. What’s the material of it? I love my stock fog lights though, but judging from your pic, it’s a close match to the stock LED’s?



Good luck with the sale, and thanks for the explanation. If I could do it all over again, it too would be a Rubicon from the get go.

Yeah that's what we should have done for sure!

 

[joshg]

Hard top does fit over the Spiderweb Shade. I installed mine and it just stays on all the time. When the hardtop is on it blocks out the white and looks like you have a headliner. I can't say about the soft top because I don't have one. You have to order the one for a hard top. There will be a cutout for the freedom panels to lock in place. If you only have a soft top you can get one without the cutout.

But am I right in assuming that if you keep the Spiderweb Shade you are eliminating the ability to use a Top Lift Pro? Doesn't the TLP need to push up on the hard top from the inside, and would get blocked from doing that by the shade?

 

[robaw]

But am I right in assuming that if you keep the Spiderweb Shade you are eliminating the ability to use a Top Lift Pro? Doesn't the TLP need to push up on the hard top from the inside, and would get blocked from doing that by the shade?

No - the TLP pushes on the hardtop just inside the back (behind the sport bar). Should be fine.

 

[Digger70]

Wednesday I installed the Cavfab tailgate plate and today I installed the Oedro rear bumper which I got discounted with a coupon from Amazon a few weeks ago. The stock rear bumper was such a pain to remove. I watched some videos which made it look so easy but getting a socket or wrench to the top nuts or bolts was tough. Then after getting the top bolts off, the bumper wouldn't come off. Since it was now able to be moved out a couple of inches the top bolts were easier to get to and after loosening one of them the bumper came off. Unfortunately the Cavfab $55 extra plug n play harness is for the license plate plug that is located within the rear bumper and not the wide plug that is under the driver's side tail light. The wire that goes into the wide plug accidentally got pulled out when taking off the rear bumper. So now I have to get someone to splice the wire for the plate light as well as connect the wires for the led lights in the rear bumper. (And yes I know the built-in hitch is not rated for towing. I had a similar Barricade bumper on my '14 JK.) The Cavfab was pretty simple to install. I did not have the right size torx bit to remove the tiny screws from the stock rear camera holder so I went to my favorite local mechanic who let me borrow one as well as a flex-shaft wrench to help remove some of the hard to access bolts on the rear stock bumper. Also on the Cavfab when you mount the camera to the mounting plate that then bolts to the tailgate plate, the holes didn't quite line up and one had to be drilled out.

 

[Kheroux]

Installed a table. Decided to try the cheaper route with this one:
https://www.amazon.com/HEQIANG-Flex...qid=1562296154&s=gateway&sprefix=jl+ta&sr=8-4

Turned out great, and I think it’s worth the risk. The only bad part is the cable ends are weak. Would recommend crimping them before the install. Fit and finish is great!

Other than needing to crimp the cables did it come with everything you needed to do the install? It looks great by the way!

 

[Mojito St Pete]

Added a stubby and winch. ARB stubby with a smittybuilt x20 with synthetic. 35x12.5x20 STT pros on the way with XD842s

 

[Visible15]

Dropped the soft top and took the lady out for a movie

 

[TRZ]

Based on another member’s post, I added vinyl to the top portion of the rear doors to try to prevent dog nail scratches. I chose carbon fiber look because of all the vinyl in my 3M sample book, the carbon fiber resisted scratches the best.

 

[SilverBackJL]

Took the doors off today and realized that last time I put the doors back on (about a month ago) I never put the bolts back into the bottom of the hinges. How bad is this for the doors?

Sponsored