Im looking at same 6pk. How much upgrade is it from mopar lift? I got front, rear track bar and full metalcloak control arm set already. Debating to go full MC 6pk lift.Wrapped these bad boys last night. 3.5” GC lift, but with stock rubicon shocks was a bit uncomfortable to say the least.
Yes, there is just enough room to move them up and down a bit. I drilled and mounted these myself, the front ones can rotate by pulling the pin. The bracket does not come pre drilled to run 2 lights. This was my modification. I do not like the diode dinamics mount. My goal was to get the lights out of the ability to fold down the windshield.
Nope not at all.
I used the same dashcam mount as you but mounted it a bit differently. I pulled off the plastic bezel around the rear view mirror and noticed two bolts hanging down from the frame that were not used.Recently added Blackvue 900 Dual Dashcams,
Very creative, sir.
I'm sure it looked just as sharp before the wash.
WELL............ my OCD Center Console Organizer (Lower) arrive today. I installed it! ... I also did an oil change.. 8-)
About the OCD Center Console Organizer (Lower) :
Purchased at Amazon..
https://www.amazon.com/gp/product/B07NB499FP/ref=ppx_yo_dt_b_asin_title_o02__o00_s00?ie=UTF8&psc=1
Can tell everyone that the organizer is very nice!
-----------
- Fit is great.. Fits like a glove.
- Quality, molded ABS 1/8" thick black plastic with matte finish just like advertised.
- The molded ABS material/ color blends into the JL inner console perfectly.
- It is odorless... no smell.
- The dividers are stout/hardy/quality/not flimsy ..... they will not break with use.
- Priced point is right. Well worth the $
About the install.... it is easy easy to install, for sure...
I believe it is best to watch the video that Todd at Salex did in regard to the install.
Watching the video gives you insight on how the 4 pieces that comprise the organizer, fit/snap together. BUT... instead of doing it like was shown in the video ...... when you yourself go to do the install yourself, follow these simple instructions that Todd gave in a recent forum post.... he said:
"It also works well to assemble the long piece and two short pieces on the passenger side on the table, then add the driver side short piece when it is in position in the console."
Anyway, terrific organizer!
Thank you, @salex for this terrific product offering.
Also, Thank you Salex, for being a forum sponsor
My install:
I have been torn on putting a flag decal on my Jeep. I think they are cool, but have played with different options. I like how this one is single color with "empty back". Do you have a like for where you purchased it?
