What kind of sun shade top is that!Added some gecko paracord to the handles, a little axe to the rear gate, alien shade..
Thanks
2 piece Alien
Very nice. What brand of lift and how many inches of lift? Ehen you get a chance.Not my rig- I'm just about done with my JLUR for now but helped my friend go from the first image to the last 2 images over the past 48 hours.
How's the wind noise? I was looking at that same rack. Also, were the attachments on the rear window hinges an issue?Added a rack to the top. It can go full length but I did not put the extension in wanted access to the freedom panels.
I love this setup. Very discrete yet powerful lights. How did you route the wire through the car from the engine compartment? Did you have to drill any holes or the existing bolts for the reflectors are adequate. Due to the shape of the reflector, I assume a part of the light is blocked, am I right. Very much appreciate more installation details and photos if you have them.So took me quite some hours to install the Rigid Ignite backup lights. I did not tap it into rear lights, instead I ran 12 ft of wires into engine hood Aux 3, so I only use it "on demand" when it is dark outside. I also used some existing bolts on the OEM plastic bumper.
I am very satisfied with the result, no more night dog walker killed in my driveway! Actually quite surprised such a small unit can produce like a light god!
Thanks for the link. I have the Rhino version and have yet to find any instructions that say don't install on the freedom panels. Just did a 12 hour round trip with boards and skis on top with no issues. They also say don't go into a car wash with them installed, maybe that's where the freedom panels become an issue.
It's one of the most underrated mods...along with bedlining the front grill.@sirryan
OK............. Now.... you are starting to sound like that condescending AH, @Rhinebeck01 ... he too is always spewing about paint the muffler and tail pipe black.
Yes. I upgraded door and mirror harnesses to include the wiring required, however without a flash to the BCM they won't work...Some have wired directly to their turn lamps.
Did you pop them off and paint them or order colored rings?
@IndustrialAction
