What did you do TO your Jeep JL today?

[Djmatt85]

Finally got my Rigid Ignites hooked up. I followed @Rhinebeck01 instructions and several of you other Jeepers. Thank you

Man are they bright. I didn’t want them hanging down off the rear bumper so I mounted them on the spare tire carrier. Hooked up to Aux 3 and b/u wire (W/OG) on the 7 pin tow hook up. Used two diodes and it works great. Took most of the day, nothing else going on and I haven’t done automotive wiring since high school (that was a long time ago).

That is awesome!!! I want to add better reverse lights as well, but like you, don’t want them hanging on the bottom of the bumper.

Sponsored

 

[pinnaclelimo]

Added another 2 wheels and 2 passengers

 

[Pjhusker]

That is awesome!!! I want to add better reverse lights as well, but like you, don’t want them hanging on the bottom of the bumper.

It’s a fairly easy install. Just take your time and use the right parts.

 

[JustCougIt]

I’ve done a bunch of little things that makes me feel better.
*Had to go with t-Rex sticker on windshield
*wired a double usb plug in center console from rear 12v outlet
*put in the mopar slush mats in the front and back (right before our snow storm which was great!)
*replaced factory dome light with 2019 version HUGE IMPROVEMENT
*installed cargo cover over the empty gap when the seats are down (this honestly should have already been standard with cloth seat option...cleans it right up)
*installed the seat recliners for back seat...just did the front mounts and left the back mounts alone...definitely more comfortable in the back seat.

Now I just have the factory auxiliary switch panel to run...a little scared but this forum has much help along with YouTube.

 

[Hibypass]

That looks amazing, the tow hooks did you cut the plate under the bumper to fit or did it have the opening.

Had to cut the skid plate. Wasn’t too bad after borrowing a cutoff tool.

 

[Mark]

Added some new shoes. Thanks @Emptypockets for the sale. I also added a CB getting ready for Easter Jeep Safari.

 

[bgj1010]

Just installed, Rhino Rack crossbars and Thule ski/snowboard carriers for our upcoming trip up to Lake Placid.

[GALLERY=][/GALLERY]

Nice! I have the same Rhino crossbars on my JL for my yak. I mounted mine back further though, not on the freedom panels. Just preference, but makes more sense for me, seeing my freedom panels are almost always out when the weather is warm in New England and that would be annoying not being able to take them off And u can easily stand on the rear wheels to access cargo...

 

[JC7]

I put an intake on and some clear side markers. The intake sounds insane. So happy I did it! ...even though I think AFE was cheap with making me reuse OEM hardware in some instances. Just send me the damn grommets new. I already realize I’m wasting money with an intake, they don’t need to rub it in. Lol

I put pedal commander on last weekend. The combo makes the Jeep more fun.

 

[R3n3gad3dSahara]

Changed out the halogen fogs, fender and headlights. Added a new bumper and winch. Also painted the grille purple and black just to see how it would look

 

[VGxHC]

I’ve done a bunch of little things that makes me feel better.
*Had to go with t-Rex sticker on windshield
*wired a double usb plug in center console from rear 12v outlet
*put in the mopar slush mats in the front and back (right before our snow storm which was great!)
*replaced factory dome light with 2019 version HUGE IMPROVEMENT
*installed cargo cover over the empty gap when the seats are down (this honestly should have already been standard with cloth seat option...cleans it right up)
*installed the seat recliners for back seat...just did the front mounts and left the back mounts alone...definitely more comfortable in the back seat.

Now I just have the factory auxiliary switch panel to run...a little scared but this forum has much help along with YouTube.

Do you have a link for the rear seat recliners?

 

[TroyBoy]

Finally got my Rigid Ignites hooked up. I followed @Rhinebeck01 instructions and several of you other Jeepers. Thank you

Man are they bright. I didn’t want them hanging down off the rear bumper so I mounted them on the spare tire carrier. Hooked up to Aux 3 and b/u wire (W/OG) on the 7 pin tow hook up. Used two diodes and it works great. Took most of the day, nothing else going on and I haven’t done automotive wiring since high school (that was a long time ago).

What is with the Park Light Diode? Are there one or two and why/how are you using them?

 

[JustCougIt]

Do you have a link for the rear seat recliners?

Jeep Wrangler JKU/JLU Black Delrin Plastic Rear Seat Recline Kit with Bolts and Washers
https://www.amazon.com/gp/product/B014TF6ID4/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1

 

[VGxHC]

Jeep Wrangler JKU/JLU Black Delrin Plastic Rear Seat Recline Kit with Bolts and Washers
https://www.amazon.com/gp/product/B014TF6ID4/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1

Appreciate that. Sorry about your Cougars tonight, that was a heartbreaker.

 

[Chomper]

Ordered a Toplifts Pro. Hopefully they are in stock like the website claims so I can get the top off the first time it hits 65-70 degrees outside.

 

[JustCougIt]

Appreciate that. Sorry about your Cougars tonight, that was a heartbreaker.

What makes it worse was it was to the freakin Huskies

Sponsored