What did you do TO your Jeep JL today?

[IndustrialAction]

Atlas door steps and ICI Magnum RT side steps

Sponsored

 

[LLRubylady]

Painted up the atlas door steps (red). They’ll be going on tomorrow.

 

[stolleee]

Trektop from 4wp
Will let it sit in sun tomorrow

 

[Hydroboy35th]

UPR catch can
Needed / not needed who knows but it can’t hurt

Is your filter on the left or right side?

 

[Wightmn]

35’s or 37’s?

37s. They ride great!

 

[ColoJLRubi]

Picked up a little project to do. I was gonna wait for AEV to come out with their bumpers but this was a deal I couldn’t pass up.

 

[Boatbuilder88]

How in the hell did you get this off in one piece? I’ve tried to loosen the adhesive with heat but it comes off in tiny microscopic pieces!

The sticker on the passenger visor came off even more easily. I guess practice makes perfect. A hair dryer and patience is required. Wondering if there is a way to remove the sticker "shadow." If not, I'm still happy with the results.

 

[Rhinebeck01]

@Boatbuilder88

Funny, when I removed mine last May, the passenger side also came off easier.

Oh, and 10 months later that 5 o'clock shadow is still there. I don't even notice it and have never had anyone comment about that shadow. No, no way to get rid of it...

 

[Wightmn]

@Boatbuilder88

Funny, when I removed mine last May, the passenger side also came off easier.

Oh, and 10 months later that 5 o'clock shadow is still there. I don't even notice it and have never had anyone comment about that shadow. No, no way to get rid of it...

I assume you tried cleaners or mineral spirits?

 

[Rhinebeck01]

@Wightmn

That vinyl will not fair well, if you use chemicals on it, I knew better then ti even try on these very pricey visors.

 

[ArkieJeep]

The sticker on the passenger visor came off even more easily. I guess practice makes perfect. A hair dryer and patience is required. Wondering if there is a way to remove the sticker "shadow." If not, I'm still happy with the results.

That’s unreal. No exaggeration - I spent 30min on it and I only got about 1/8 of it off. I

 

[HoundDude]

That’s unreal. No exaggeration - I spent 30min on it and I only got about 1/8 of it off. I

try using a hot air blow dryer to heat it up a bit...

 

[Boatbuilder88]

The sticker on the passenger visor came off even more easily. I guess practice makes perfect. A hair dryer and patience is required. Wondering if there is a way to remove the sticker "shadow." If not, I'm still happy with the results.

That’s unreal. No exaggeration - I spent 30min on it and I only got about 1/8 of it off. I

Preheat the sticker with a hairdryer. Peel the sticker slowly at 180 degrees while continuing to apply heat. It will come off. The visor vinyl will "pucker" a little but it will quickly tighten up.

 

[Pjhusker]

Finally got my Rigid Ignites hooked up. I followed @Rhinebeck01 instructions and several of you other Jeepers. Thank you

Man are they bright. I didn’t want them hanging down off the rear bumper so I mounted them on the spare tire carrier. Hooked up to Aux 3 and b/u wire (W/OG) on the 7 pin tow hook up. Used two diodes and it works great. Took most of the day, nothing else going on and I haven’t done automotive wiring since high school (that was a long time ago).

 

[Jeepers!]

I did some MAJOR modifications to my newly-leased JLU this afternoon.

Tire cover (can you even see the Jeep behind that cutting edge stealth technology? yeah I didn't think so):

Is this a joke? All I see is a silver car.

Sponsored