Replace Your Factory Door Nets with Modular MOLLE Storage | Jeep JL/JT | American Adventure Lab

[Adventure Lab (Team)]

Welcome

American Adventure Lab

www.AmericanAdventureLab.com

Phone: 435-414-0615 | Email: [email protected] | Instagram: @americanadventurelab

https://americanadventurelab.com/product/jeep-jl-molle-door-panels/

One of the most underutilized storage areas in the Jeep Wrangler JL and Gladiator JT is right on the doors.

The factory mesh door nets tend to sag, stretch, and offer very little organization. Small items end up bouncing around, disappearing into the bottom of the pocket, or becoming difficult to access when you need them most.

We wanted a cleaner, stronger, and more versatile solution.

The American Adventure Lab Jeep JL/JT MOLLE Door Panels replace the factory door nets with a durable MOLLE-compatible mounting surface, allowing you to customize your storage with pouches, organizers, tool mounts, medical kits, recovery gear, and other trail essentials while maintaining a clean factory appearance.

Features & Benefits:

• Designed for Jeep Wrangler JL, JLU, and Jeep Gladiator JT models

• Replaces factory mesh door nets with functional MOLLE storage

• Compatible with MOLLE pouches, organizers, tool holders, and accessory mounts

• Laser-cut 14-gauge steel construction

• Available in multiple powder coat finishes or raw steel

• Creates customizable storage solutions tailored to your needs

• Helps keep frequently used gear organized and easily accessible

• Strong, rigid construction built for off-road use

• Available for both front and rear doors

• Clean, low-profile appearance that complements factory interiors

• Made in the USA

• Designed and manufactured in St. George, Utah, USA

Installation Notes:

• Simple installation using included hardware

• Mounts directly to the lower door trim area

• No complicated fabrication required

• Installation can be completed with basic hand tools

• Front and rear panels sold separately

• MOLLE accessories and pouches sold separately

• Installation instructions available through the American Adventure Lab Instructions Library

Frequently Asked Questions

Will these fit my Jeep?

The MOLLE Door Panels are designed for Jeep Wrangler JL, JLU, and Gladiator JT models. Front and rear panel options are available depending on your vehicle and storage needs.

What can I mount to the panels?

Anything designed around the MOLLE standard including first aid kits, flashlights, radios, recovery gear, tool pouches, fire extinguishers, EDC organizers, and other storage accessories.

Are they strong enough for off-road use?

Yes. The panels are laser cut from 14-gauge steel and designed to withstand daily use and trail conditions.

Do I have to remove my factory door panels?

No. The MOLLE panels install over the factory lower door area and replace the functionality of the factory net storage.

Can I install them myself?

Absolutely. Installation is straightforward and can typically be completed with basic hand tools.

Why switch from the factory door nets?

The MOLLE panels provide significantly more organization, durability, and customization while eliminating the sagging and stretching commonly associated with factory mesh pockets.

If you're looking for a simple way to add organization and functional storage to your Jeep without sacrificing interior space, the American Adventure Lab MOLLE Door Panels are an easy upgrade that keeps your gear secure, accessible, and ready for the next adventure.

We're happy to answer any questions about fitment, storage setups, accessories, or installation.

Sponsored

 

[Dyolfknip74]

Any thoughts of adding a few bends and material to be able to put stuff in there?

 

[yokramer]

https://www.jlwranglerforums.com/forum/forums/american-adventure-lab.265/

 

[Adventure Lab (Team)]

Any thoughts of adding a few bends and material to be able to put stuff in there?

Way ahead of you! If you're looking to maximize your storage space, we offer our Door MOLLE Pockets, which utilize the otherwise unused space in your doors for additional gear storage.

Check them out here:
https://americanadventurelab.com/product/jeep-jl-jt-door-molle-pockets/

 

[Dyolfknip74]

Way ahead of you! If you're looking to maximize your storage space, we offer our Door MOLLE Pockets, which utilize the otherwise unused space in your doors for additional gear storage.

Check them out here:
https://americanadventurelab.com/product/jeep-jl-jt-door-molle-pockets/

Great! Thank you!

One more question, when you ship to Canada, is it possible to have "Made in the USA" clearly marked on outside of package? As far as I know, this week, CUSMA still applies and doing that allows us to not get bent over with duty and brokerage fees.

 

[GabeBoyTheGreat]

Very good to hear that these are made in the U.S., and the color options are pretty neat. Too bad I already have a set of DV8s or I would seriously consider these.

One issue I have with these types of door pockets is that the MOLLE panels are such gimmicks. Most of the front panels are completely unusuable because there is very little clearance with the seats when the doors are closed. The area of the panel that is accesible in front of the seats aren't really usuable either unless you want to give up legroom.

The other issue is that there is very little clearance between the opening of the pocket and the bulge in the door, making it difficult to fit my hand in the pocket to retrieve items.

I would have liked to have seen an option that is simply a pocket without the MOLLE gimmick that is a little bit shorter to open up the clearance between the opening of the pocket and the bulge in the door.

 

[Adventure Lab (Team)]

Very good to hear that these are made in the U.S., and the color options are pretty neat. Too bad I already have a set of DV8s or I would seriously consider these.

One issue I have with these types of door pockets is that the MOLLE panels are such gimmicks. Most of the front panels are completely unusuable because there is very little clearance with the seats when the doors are closed. The area of the panel that is accesible in front of the seats aren't really usuable either unless you want to give up legroom.

The other issue is that there is very little clearance between the opening of the pocket and the bulge in the door, making it difficult to fit my hand in the pocket to retrieve items.

I would have liked to have seen an option that is simply a pocket without the MOLLE gimmick that is a little bit shorter to open up the clearance between the opening of the pocket and the bulge in the door.

Thanks for the thoughtful feedback! We actually do offer a pocket option for customers looking for a simpler storage solution. It sounds very similar to what you're describing!

Would love for you to check them out!
https://americanadventurelab.com/product/jeep-jl-jt-door-molle-pockets/

 

[Adventure Lab (Team)]

Great! Thank you!

One more question, when you ship to Canada, is it possible to have "Made in the USA" clearly marked on outside of package? As far as I know, this week, CUSMA still applies and doing that allows us to not get bent over with duty and brokerage fees.

Unfortunately, not at the moment. We're currently shipping our products in plain boxes. However, that's a great suggestion, and it's definitely something I'll look into implementing in the future. We appreciate the feedback!

 

[Dyolfknip74]

Unfortunately, not at the moment. We're currently shipping our products in plain boxes. However, that's a great suggestion, and it's definitely something I'll look into implementing in the future. We appreciate the feedback!

It literally just needs to be a stamp or a sticker. I will keep an eye out.

 

[Adventure Lab (Team)]

It literally just needs to be a stamp or a sticker.

Definitely let me know if you decide to place an order! Feel free to send me the details, and I'll be happy to see what I can do to help get this taken care of!

 

[Dyolfknip74]

Definitely let me know if you decide to place an order! Feel free to send me the details, and I'll be happy to see what I can do to help get this taken care of!

Will do! Thank you.

 

[Only-In-A-Jeep]

Put mine on a few months ago. I used straps thru the molle panel holes to secure a few items and it works well.

 

[Adventure Lab (Team)]

Put mine on a few months ago. I used straps thru the molle panel holes to secure a few items and it works well.

That's awesome to hear! We really appreciate your support and are glad you're enjoying the product. If you ever need anything or have any questions, feel free to reach out anytime.

 

[sixspeed]

Way ahead of you! If you're looking to maximize your storage space, we offer our Door MOLLE Pockets, which utilize the otherwise unused space in your doors for additional gear storage.

Check them out here:
https://americanadventurelab.com/product/jeep-jl-jt-door-molle-pockets/

Seems to blow the whole concept if you have to add supplementary side bags.

 

[brandofamily]

I have these in my JKU and they are great for sure. Way better then the nets Jeep supplies.

Sponsored