What did you do TO your Jeep JL today?

[DickZip]

Got the @Motobilt spare tire delete back from the powdercoater today and installed. Need to wire up the license plate light/3rd brake light and move the license plate tomorrow.

@Motobilt I'd sure like a delete plate to cover the vents. I have a bumper mounted spare tire carrier and the vents and holes are exposed now and I hate it.

 

[Blu bi Kong]

Got the same bumper en route in the mail also. Wanted to ask...trailer plug and bracket, left in original OEM location or did you move it? If its in the original location, does the bumper clear? Looks like its hidden somewhere...

Can you post additional side pics and diff angles?

Here is a couple pictures. One shows that I did in fact relocate the trailer plugs.
Seems all good to go

 

[Swanny297]

@Motobilt I'd sure like a delete plate to cover the vents. I have a bumper mounted spare tire carrier and the vents and holes are exposed now and I hate it.

Just make sure if you cover the vents they still have room to breath - they are functional.

 

[Kenny]

Installed matte colored grill inserts

 

[VolCntry73]

Installed a LOD Signature Mid Width bumper and X2O Winch.

 

[szobell]

Windshield down!!

This is my 3rd wrangler as I have had a TJ, JK and now JL, but this is the first time I have gone with the windshield down.

It is awesome! It reminds me of being on the lake in the boat !!

 

[NC4x4]

@Motobilt I'd sure like a delete plate to cover the vents. I have a bumper mounted spare tire carrier and the vents and holes are exposed now and I hate it.

This could be an option for you...
https://genright.com/products/jeep-wrangler-jl-tailgate-plate-and-license-plate-mount.html

 

[Kenny]

Passenger Warning

 

[DanPop]

Where did you get the decals behind the front fender vent?

 

[CalsJLUR]

Passenger Warning

This is great!

 

[Kurtj29]

Where did you get the decals behind the front fender vent?

Look here for the all black:
https://www.pixeldecals.com/shop/JL-Fender-Vent-Blackout-Decal-Pair

Look here for the one with the red outline:
https://www.pixeldecals.com/shop/JL-Fender-Vent-Blackout-Decal-2C-Pair

Plus the guy who owns the shop is a JL Forum member.

 

[Spank]

Permanently installed my CB mic clip on the left side of the center console. It's clean, unobtrusive, doesn't interfere with driving in any way, and works nicely.

 

[Mantacon]

Noooooooo holes in the beautiful Rubicon dash.

Permanently installed my CB mic clip on the left side of the center console. It's clean, unobtrusive, doesn't interfere with driving in any way, and works nicely.

 

[ChattVol]

Used mineral spirits to smooth out plastidip on grill and added 3 new coats. Also added some polyfill and a little gt mat to soundbar and sub. It didnt make a noticeable difference in soundbar because I didnt use alot due to the odd port setup...will probably replace and cut to fit 5 1/4" or 6.5" in soundbar. Also went naked for first time and took kids on short ride:

 

[Tjax]

I worked with a local machine shop and came up with a 2 door trunk design. I contacted many of the security trunk providers and nobody had a trunk for the 2 door with the back seat in place. Most told me to check back in 6 months. The design I came up with is comprised of 3 pieces of 1/8" mild steel (11 gauge if I’m not mistaken - very stout). My design requires the center section to be removed to tumble the seat. Condensing it by 1 to 1.5" would allow for the seat to tumble, but I wanted the extra space. I used the existing floor anchors for mounting and used Rustoleum bed liner to coat it. The rear cubby is still accessible. I have automotive weatherstripping on order for the left/right gaps and the back edge.