BobK
Well-Known Member
- First Name
- Bob
- Joined
- May 24, 2018
- Threads
- 50
- Messages
- 388
- Reaction score
- 202
- Location
- Parker, TX
- Vehicle(s)
- 2018 JL Rubicon Unlimited
- Occupation
- Semi-Retired
- Vehicle Showcase
- 1
https://www.amazon.com/gp/product/B07BVT3RKF/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1BobK, which brake light ring is this and did you have to modify it to work? Thanks.
Bought it on Amazon. It came with the red and black wire about a foot long with bare ends. I kept the factory plug on the wiring harness, but about six inches from the plug that would have gone to the factory 3rd brake, I stripped the wires and soldered the two wires from the LED ring onto the wiring harness.
Also, both this one and the Rugged Ridge one do not come with a hole (none on the RR and too small on this one) big enough to go over the backup camera protrusion. So I had to use a hole cutter from Harbor Freight to make the hole big enough. The exact size you need is 2 3/4 but the set I bought came with a 2 1/2 and a 3 inch so I used the 3 in. To keep it from spinning as I drilled/cut. I put it on top of a piece of wood that I had laying around and put 4 finish nails partially nailed through the lug holes on the rig to keep it stationary.....worked like a charm.
Sponsored