What did you do TO your Jeep JL today?

[digitalbliss]

1941 decal on Rubi

That looks great, I've been looking for a Rubi compatible hood decal and Haven found one.

Sponsored

 

[jrohan07]

Removed the visor warning stickers. Alcohol and a hair dryer. Drivers side took an hour as you have to pull extremely slow and passenger side heated up and peeled right of. Man are those visor warning stickers baked on.

 

[PixelPerfex]

Hello, First time here...
We are jeep family (his - JKU, hers - JLU) and Id' Like to share the progress of my wife's JL build.
It is still a work in progress..
List of Mods:
1. Black Rhino Arsenals 20x12 Custom Painted
2. VPR 4x4 Front Bumper - Custom Painted Side Inserts
3. Mopar Lift Kit
4. Custom Hydro Dipped Interior
5. Adjustable Front Lower Control Arms
6. Front Adjustable Track Bar
7. Nitto Trail Grapplers 37 x 13.5

 

[J.R. Quimby]

Hello, First time here...
We are jeep family (his - JKU, hers - JLU) and Id' Like to share the progress of my wife's JL build.
It is still a work in progress..
List of Mods:
1. Black Rhino Arsenals 20x12 Custom Painted
2. VPR 4x4 Front Bumper - Custom Painted Side Inserts
3. Mopar Lift Kit
4. Custom Hydro Dipped Interior
5. Adjustable Front Lower Control Arms
6. Front Adjustable Track Bar
7. Nitto Trail Grapplers 37 x 13.5

Bitchin'

 

[JLSNC]

Just got my Firecracker Red JL Sport S on Saturday and got my first mods today. Got Rubicon wheels and tires, a stubby antenna, and the black Jeep fuel filler door!

 

[c3h5]

Thank you for your feedback! Below are some of the pictures I took during the install. I am fortunate to have a tall ceiling in my attic so I could mount the winch about 9' above the attic floor. The only pictures I haven't taken yet are the frames directly above the holes in the ceiling. I can take additional photos if you want to see more.

This is helpful to see, I’ve been planing this type of lift as well but only reached the point of cleaning/emptying my garage so far lol. Next I need to make a hatch to access the space above as my ceiling is finished. Any recommendations or tips you can share?

 

[From0toJ]

I bought 4 of these (2 boxes) at Home Depot to hold it secure when all the way down. (2 to go around top at back and 2 to secure it to roll bar). I also found them at Amazon.

VELCRO Brand - All Purpose Straps - 36" x 2" All Purpose Strap, 2 Ct. - Blackhttps://www.amazon.com/dp/B00575600W/ref=cm_sw_r_cp_api_i_GU.eBbMBB0HRK

Thanks again, 'bell. I ordered a set of two just now. Arriving Friday.

 

[GoGators353]

Ran into the same problem with the cart, way to narrow but I glued it with no room to cut it up

Did you wire in the relay for the steps?

Roam side steps:

Pretty busy Sunday with the Jeep. I also built the door holding cart from another thread. (Im gonna have to modify it though as the width of the carriers are more suited to JK doors.)

The wiring of the side steps was the most time consuming but it all worked out, thanks to a Roam Side steps thread.

 

[Ybohannon]

Installed my LOD sliders!

Did you order directly from them? Just curious. When I first contacted them about ordering, quick response and they even left message on voicemail. Have since called several times, left message a couple times, had one person answer phone, take name and number and never heard back from them. Recently called and spoke to a real live human and they were unable to give ETA on availability. Just checked online and sliders available but not destroyer. I guess bottom line is just wondering about their customer service

 

[TroyBoy]

Did you order directly from them? Just curious. When I first contacted them about ordering, quick response and they even left message on voicemail. Have since called several times, left message a couple times, had one person answer phone, take name and number and never heard back from them. Recently called and spoke to a real live human and they were unable to give ETA on availability. Just checked online and sliders available but not destroyer. I guess bottom line is just wondering about their customer service

That's strange. I phoned in my order because their web doesn't allow shipping to Canada. After that I emailed the sales department a few times and always had a response by the next day.

 

[andyacad]

Spent a couple minutes installing Mopar pet barrier

Spent a couple minutes removing Mopar pet barrier after finding our 20lb Terrier mix laying on front seat after returning to Jeep from quick lunch. The little bugger just went around the barrier, squeezing through the space between the roll bar and hard top sides!

 

[BDJeep1]

I have done a few things.....not all today:

1. Antenna X 13
2. Plastic dip my keyholes
3. Got my wheels powder coated semi-gloss black (negotiated this with my dealer as part of the order)
4. Put on black lug nuts

Not the best pic:

 

[Izzy901]

I have done a few things.....not all today:

1. Antenna X 13
2. Plastic dip my keyholes
3. Got my wheels powder coated semi-gloss black (negotiated this with my dealer as part of the order)
4. Put on black lug nuts

Not the best pic:

I would of never thought I'd be attracted to a two door but lately, they've been looking really nice!

 

[Dynomite1371]

I installed Hot Head Headliners with the Sound Assasin Strips. I also installed my electric hoist in the attic above the garage.

Lange?

 

[Lindag8r]

Busy day

- Put on Warn Xeos winch
- Put on Ace sliders
- Replaced 3rd brake light
- Pulled and hung doors
- Found the perfect straps to keep my soft top from moving around

I think my mods are complete. (Or at least that is what my wife thinks.... )

The mods look amazing! I am really loving the sliders and third round light! I am not brave enough yet to attempt the winch plate and winch. Baby steps....stubby antenna, sliders, grab bars, tailgate protective decal so far. ACE sliders on order.

Sponsored