What did you do TO your Jeep JL today?

[Saejin]

Here it is. Light bars on the interior of the Jeep. It was on the concept Nacho Jeep.
Check the 8:00 mark

Sponsored

 

[jravin]

Please tell us how to do this!

Go to this link and click on "Sign Up", then just follow the directions. Once the account is setup, go to UConnect Apps and go to the Wireless App and set a password then check the enable box.
https://myvehicle.att.com/lpportal-2/#/jeep/learn

 

[Rad vlad]

Post some links, give a few details. I like this! Are they wired or battery and a switch'

Wired into Aux 3
https://www.superbrightleds.com/cat...lor,Pink,136,4636:Strip_Type,Indoor,262,17074:

you can get everything needed from the site above.
I went with 380 lumes per foot, each bar is 14 inches
low profile housing I cut to size. I wired to inside AUX harness and grounded to door check 10mm screw behind the corner kick panel. I keep it as easy as possible

 

[TTEChris]

Well made? Heavy?

They are well made, not heavy like full blown rock sliders but they have a little weight to them. Fitment was spot on, that's something you don't always get from a product that sits so close to the body/fenders.
Has anyone wired lights that turn on when you open the doors on the JL? I need to wire the LED's to turn on when I open the doors, but I don't want to go fishing for wires with my test light for hours.

 

[jdpatt12]

I am also a little confused by this on my JL. I was expecting(And hoping for) the smaller tailights that don't seem to stick out to the side as much. A buddy of mine lost his tailight on a trail that takes you through a dried up creek bed that is barely wide enough for the Jeep. After witnessing his mishap, I was fortunate to avoid the same fate. I fear these tailights will be the first thing to go on a tight trail.

Do you have led lights?

 

[dhutcheson]

Bartact front seat covers. As much as I love the red stitching I added a level of protection that I discovered with my JK. The Bartact seat covers are only available for the front seats right now with the rear covers coming in about a month according to Bartact directly.

 

[AZCrawl]

Here it is. Light bars on the interior of the Jeep. It was on the concept Nacho Jeep.
Check the 8:00 mark

I think you meant the 7:00 mark.

 

[Command Line RC]

Bartact front seat covers. As much as I love the red stitching I added a level of protection that I discovered with my JK. The Bartact seat covers are only available for the front seats right now with the rear covers coming in about a month according to Bartact directly.

$399 for some seat covers...oh hell naaaa! They do look bad ass though!!!!

 

[Bingy]

New tires delivered today :cwl::cwl:

 

[Lurvis33]

Wired into Aux 3
https://www.superbrightleds.com/cat...lor,Pink,136,4636:Strip_Type,Indoor,262,17074:

you can get everything needed from the site above.
I went with 380 lumes per foot, each bar is 14 inches
low profile housing I cut to size. I wired to inside AUX harness and grounded to door check 10mm screw behind the corner kick panel. I keep it as easy as possible

Did you go with the frosted lens? Could I just get by with doing the ST10 10mm Silicone Tubing to waterproof it? How’d you mount it? Did you get the LC2 Locking Connector (Male or Female?)

So many questions but it looks great and simple!

 

[zodleviton]

I ordered mine the other day and it will be here Friday. Great customer service. I received an email with tracking number a couple of hours after ordering.

Sooooo...Basically the opposite of FCA/Jeep?

 

[szobell]

I think you meant the 7:00 mark.

I could see them best at around 25 seconds in. I want those!!!!

 

[Rad vlad]

Did you go with the frosted lens? Could I just get by with doing the ST10 10mm Silicone Tubing to waterproof it? How’d you mount it? Did you get the LC2 Locking Connector (Male or Female?)

So many questions but it looks great and simple!

Frosted lens, I’m sure tubing would work or you can get waterproof LED strips if wanted waterproof. I used scotch outside double sided tape to secure. I cut of the connector and just ran red and black that’s about the extent of my wiring knowledge

 

[jeremyjeep]

Bartact front seat covers. As much as I love the red stitching I added a level of protection that I discovered with my JK. The Bartact seat covers are only available for the front seats right now with the rear covers coming in about a month according to Bartact directly.

Do you have a link to these seat covers? I Googled for it, but I only see them for the JKs.

Update: Found it - https://www.bartact.com/products/ba...air?rq=yr_2018~mk_jeep~md_wrangler-jl-and-jlu

 

[Shiloh]

Leveling kit, 33” tires, 18” Black Rhino wheels

Sponsored