JlRubicon13
Well-Known Member
- Thread starter
- #1
Hi all, Currently I have AEV wheels which have a backspacing of 5.77. I’m still deciding on what lift kit to get. Probably will go with a metalcloak 2.5 in game changer. I noticed that I need around 4.5 in of backspacing to run this lift with 35s and get a good articulation, if I install 1.75 spacers and bring the backspacing down to around 4in would that cause too much stress on the axle and bearings components?
Thank you
Thank you
Sponsored