Tazer questions

[wanderer]

I installed a tazer mini the purpose is for several reasons
First is tpms I want to run lower tire pressures with it
The first program attempt i couldn't get the pressure set right so i just disabled it
A few months ago go by and I want to set tire pressure at 27 to i go to reset the tpms and every time i get to
That setting the dash screen goes crazy and cyles through every setting on that window oil temp oil life etc

do i need to unmarry and the remarry it ? Or is this some glitch?

Sponsored

 

[Kracka]

I'd suggest unmarrying, updating, then re-marrying.

 

[Grayhound]

What i didn't understand the 1st time is that you need to set it at the desired pressure then drive it for 10 mi or so for it to register.
The directions left me guessing a bit.
I have since just enabled the sgw to.pass through and use my jscan app for tpms.

 

[aeonixx1001]

I installed a tazer mini the purpose is for several reasons
First is tpms I want to run lower tire pressures with it
The first program attempt i couldn't get the pressure set right so i just disabled it
A few months ago go by and I want to set tire pressure at 27 to i go to reset the tpms and every time i get to
That setting the dash screen goes crazy and cyles through every setting on that window oil temp oil life etc

do i need to unmarry and the remarry it ? Or is this some glitch?

Unmarry it, did you get the latest firmware update? Easy to do. Put it back on your Jeep and it acts like a new device. You have to reset every setting. But it works. Mine was going squirelly as well.

 

[aeonixx1001]

Unmarry it, did you get the latest firmware update? Easy to do. Put it back on your Jeep and it acts like a new device. You have to reset every setting. But it works. Mine was going squirelly as well.

Do a firmware upgrade on your taser. Unmarry it, do the upgrade and reinstall taser.

Sponsored