6th Floor Mule
Well-Known Member
- First Name
- Keith
- Joined
- Aug 5, 2020
- Threads
- 2
- Messages
- 733
- Reaction score
- 1,556
- Location
- Woodstock, GA
- Vehicle(s)
- 2018 JLU Sahara 6MT
Thanks Lou . . . .weird as it sounds, I traced it back to the TA speaker install. I was removing the speaker for inspection, and as soon as I started loosening the first screw, the speaker cleared up. I loosened both screws and retightened, and now the speaker is fine. I’m a bit perplexed, but guessing vibration was the culprit(?). Just installed the TA’s a few days before the sound bar speakers, so it’s possible the issue wasn’t noticeable at lower volume levels. Also proof not to start projects after midnight ?.I replaced my front dash speakers with the Infinities and had no issues whatsoever when I installed the pods and Kickers. I'm sure you paid attention to the polarity of the speaker wires as that may possibly be the only thing to check. I know that the speaker adapter cables I bought for the dash speakers were wired backwards and I had to de-pin the connectors and swap the wires first.
Sponsored