remote entry doesn't work after taking door off

[scarleton]

I have a 2020 JLUR with keyless entry. Last night I took the wire harness off the passanger door to run some wires. When I hooked the wire harness back up everything worked except the keyless entry. The button the door does not work, nor can I unlock the door when it is locked. The windows work, the lock/unlock button work, just no keyless entry. Any idea the issue?

Sponsored

 

[lowmpg]

Certain you put the harness all the way back together? By chance did you have the Jeep running when you disconnected or reconnected the wiring?

 

[Zukoda]

Take connector back off and inspect pins - one may have been bent or recessed when you hooked it up.

 

[Rico1111]

^^^^^^^ this ^^^^^^

 

[scarleton]

After a good sleep and a somewhat productive day at work, I returned to the Jeep and fixed the project that failed the night before AND straightened the pins to get the door working again. Thanks everyone for the obvious solution I was too frustrated to see at the time. I do appreciate it!

Sponsored