Quadratec entry guards

[JLsport19]

Long story short ordered them for my 2 door they sent me a set for 4 door. Charged me for 2 door which is fine I haven't had a chance really to look at the Jeep or the guards but does anyone know if the front will fit. Reguardless saying it's for a 4 door? Not sure if there is any difference in that particular area between the 2 door and 4 door? Thanks for any help!

Sponsored

 

[UNC Rubicon]

Long story short ordered them for my 2 door they sent me a set for 4 door. Charged me for 2 door which is fine I haven't had a chance really to look at the Jeep or the guards but does anyone know if the front will fit. Reguardless saying it's for a 4 door? Not sure if there is any difference in that particular area between the 2 door and 4 door? Thanks for any help!

The fronts are the same.

 

[DaK]

I had to trim my passenger door entry guard. I could see light coming through the door and the sill after the install. Be interested in if you have the same experience. Driver's side was fine with the install.

 

[wv18jl]

Mine fit perfectly

 

[JLsport19]

I had to trim my passenger door entry guard. I could see light coming through the door and the sill after the install. Be interested in if you have the same experience. Driver's side was fine with the install.

It'll be tomorrow night or Saturday before I get em on. I'll let you know

 

[JLsport19]

It'll be tomorrow night or Saturday before I get em on. I'll let you know

@DaK

 

[Quadratec]

Sorry to see this! Please PM me with your order # and I'll get this resolved.

Thanks!

-Rick

 

[DaK]

Sorry to see this! Please PM me with your order # and I'll get this resolved.

Thanks!

-Rick

PM sent

 

[JLsport19]

@DaK put em on last night. I added more 3m tape. 2 strips are not enough in my opinion. Seem to fit fine. Can’t see them with the door closed. Doors close fine also

 

[DaK]

@DaK put em on last night. I added more 3m tape. 2 strips are not enough in my opinion. Seem to fit fine. Can’t see them with the door closed. Doors close fine also

Thanks for the feedback.

 

[Quadratec]

Just checked with my product team. The 2 and 4 door fronts are the same.

If anyone has any questions, please let me know.

Thanks & have a great day!

-Rick

 

[paffemt]

I put mine on Tuesday Night. I noticed that the rear guards are visible under the rear doors from the outside when the door is closed.

 

[JohnnyB54]

Just checked with my product team. The 2 and 4 door fronts are the same.

If anyone has any questions, please let me know.

Thanks & have a great day!

-Rick

I was one of the early orders and I did notify Quadratec about 2 issues. The 1st issue was my front passenger door did not seal correctly once the sill guard was installed. I had to trim then heat up the guard and bend it in order to have the front weather seal passenger seal. The 2 rear door guards are installed correctly and are pressed tight to the door. Even doing this if you look you can see the guards. When I did notify Quadratec I was told they were designed like this to provide maximum coverage. That may be the case but why did I need to trim and bend the front to get a good seal. Nice idea but terrible implementation.

 

[Capt-Zoom]

I wish they had a 3rd strip of tape on the top lip.

 

[2500 hd]

I put mine on Tuesday Night. I noticed that the rear guards are visible under the rear doors from the outside when the door is closed.

Mine is the same way...

Sponsored