chevymitchell
Well-Known Member
- First Name
- Shawn
- Joined
- Feb 18, 2018
- Threads
- 112
- Messages
- 5,017
- Reaction score
- 12,147
- Location
- Pueblo West, CO
- Vehicle(s)
- 2022 392XR, 2025 Wagoneer S, 2006 LJ 6-spd
- Occupation
- Avi Engineer
- Thread starter
- #1
Just a friendly reminder that if you own a Rubicon, that you should be performing the potting sensor procedure as soon as possible.
The procedure internally seals the sensor to prevent oil from damaging the capacitive circuitry and causing a blinking locker light. At this point, the only way to get this fixed is an axle assembly replacement at the dealer.
If you’ve already re-geared and have not done this procedure, you absolutely need to do it now. Once it fails, your axle will not be covered under warranty.
Here’s the link to the procedure and thread. Read through the thread if you have more questions. Most of them are answered here.
https://www.jlwranglerforums.com/forum/threads/locker-position-sensor-potting-dana-44.59581/
The procedure internally seals the sensor to prevent oil from damaging the capacitive circuitry and causing a blinking locker light. At this point, the only way to get this fixed is an axle assembly replacement at the dealer.
If you’ve already re-geared and have not done this procedure, you absolutely need to do it now. Once it fails, your axle will not be covered under warranty.
Here’s the link to the procedure and thread. Read through the thread if you have more questions. Most of them are answered here.
https://www.jlwranglerforums.com/forum/threads/locker-position-sensor-potting-dana-44.59581/
Sponsored
