Our Commitment to You! - American Adventure Lab

[jeepingib]

I've had a set of your fender chop lights and brackets for a long time now. Just finally damaged one badly enough that I will have to replace it. I saw that you partnered with Diode Dynamics to develop a better LED module for the kit. Does it work with a bracket from 2019ish. And does it have to be sequential? I prefered using the factory amber lights for DRL instead of the white, and wasn't able to keep that functionality because of the sequential circuit on the amber signal.

Sponsored

 

[SadRobot]

I've had a set of your fender chop lights and brackets for a long time now. Just finally damaged one badly enough that I will have to replace it. I saw that you partnered with Diode Dynamics to develop a better LED module for the kit. Does it work with a bracket from 2019ish. And does it have to be sequential? I prefered using the factory amber lights for DRL instead of the white, and wasn't able to keep that functionality because of the sequential circuit on the amber signal.

I don't have a answer for this but what's going on with your Jeep at this point? Avatar is still upside down with low health. Any updates?

 

[SadRobot]

We're working on getting @SadRobot out here to do some 2-door things. Fingers crossed that we can make that work.

It's really just an excuse for me to drive to Cedar City for pizza.

 

[jeepingib]

I don't have a answer for this but what's going on with your Jeep at this point? Avatar is still upside down with low health. Any updates?

Well, I took the temporary easy way out. I put a bottle of K-seal in it to try to keep it running long enough to save for an engine swap. Drove it to work today for the first time in half a year or more.

 

[wanderer]

whoops

 

[Terrymo]

It's really just an excuse for me to drive to Cedar City for pizza.

After your Hungry Valley SVRA Today photo cover debut and your ownership of the sexiest Jeep of the year, AAL would be foolish not to use you as their new spokesperson. Think of all the french fry and pizza endorsements that would come rolling in. If only you weren’t (apparently) camera shy

 

[SadRobot]

After your Hungry Valley SVRA Today photo cover debut and your ownership of the sexiest Jeep of the year, AAL would be foolish not to use you as their new spokesperson. Think of all the french fry and pizza endorsements that would come rolling in. If only you weren’t (apparently) camera shy

Occupational hazard. I only do behind the camera, not in front.

 

[Adventure Lab (Team)]

I've had a set of your fender chop lights and brackets for a long time now. Just finally damaged one badly enough that I will have to replace it. I saw that you partnered with Diode Dynamics to develop a better LED module for the kit. Does it work with a bracket from 2019ish. And does it have to be sequential? I prefered using the factory amber lights for DRL instead of the white, and wasn't able to keep that functionality because of the sequential circuit on the amber signal.

Yes! our new lamps are fully compatible with the original brackets, replacement lamps can be ordered here - https://americanadventurelab.com/product/replacement-high-line-light/ These new lamps have been super popular and offer an even sleeker look than the originals as well as using the OEM connector without needing programming. They can do both a sequential and continues light sequence by snipping an exposed wire on the back of the harness.

 

[TEAMSLO]

Any chance you will be at Off-Road Expo in Costa Mesa this October?

We're not planning on it at this point, but that could change. It's definitely on the radar.

Damn, you guys were one of the vendors we were hoping to see there. Was planning a weekend trip to SoCal.

BTW, what's the typical time for "processing" after an order? Does processing just cover processing the payment or does that include manufacturing time until shipment? And final question, how much longer for the rear bumper that is in the works?

 

[Adventure Lab (Team)]

Damn, you guys were one of the vendors we were hoping to see there. Was planning a weekend trip to SoCal.

BTW, what's the typical time for "processing" after an order? Does processing just cover processing the payment or does that include manufacturing time until shipment? And final question, how much longer for the rear bumper that is in the works?

Don't get me wrong, I would love to go to the show, but right now we're focusing on these forums and production. I like the flow we have in the shop right now! Things could change and we may end up there. That one is definitely on the short list. One of the Ranger Raptors we worked on will be there and possibly a Bronco with our MASS Cargo System in it.

It will stay in Processing status until it ships. We track each individual component through the entire system now, but they don't become a "product" until they are assembled at the end of the process. We're buliding a lot of stuff to stock now and that is drastically cutting down on the production time for our main products.

I'll be finalizing the new Modular Rear Bumper as part of our new 4XE project. I believe we have bumpers and lighting pretty early on in the build plan.

https://www.jlwranglerforums.com/fo...d-organization-american-adventure-lab.154675/

 

[Xploring_Outdoors]

Damn, you guys were one of the vendors we were hoping to see there. Was planning a weekend trip to SoCal.

I was really looking forward to seeing some of their products in person as well! I'll keep my fingers crossed that they'll make it to the show.

 

[Adventure Lab (Team)]

I was really looking forward to seeing some of their products in person as well! I'll keep my fingers crossed that they'll make it to the show.

Thanks. If that changes, I'll be sure and post that here. I appreciate the interest!

 

[ShadowCobra]

Here is what the @Adventure Lab (Team) had installed in my '24 2 door JL a few weeks ago - the platform and 2 slides! Works great and has a light weight setup. Brit and his 2 door JK was my inspiration for this option with the Milwaukee Packout system .

And yes, I have their Versa table as well, which I installed last year. Can't wait for the new cargo shelf to really use the space for longer trips.

 

[Adventure Lab (Team)]

Here is what the @Adventure Lab (Team) had installed in my '24 2 door JL a few weeks ago - the platform and 2 slides! Works great and has a light weight setup. Brit and his 2 door JK was my inspiration for this option with the Milwaukee Packout system .

And yes, I have their Versa table as well, which I installed last year. Can't wait for the new cargo shelf to really use the space for longer trips.

Lots of flexibility with that setup! Thanks for showing it off!

 

[Krondor]

Been waiting on a sale for your table and shelf ... but for years I have been staring at this:

Welcome aboard!

Sponsored