Lift Issue - Not Sitting Level

[Ricklime22]

If it's that far out of whack, it's going to be the trackbar. There needs to be a relocation bracket, or the kit should have it's own adjustable trackbar.

I’ll check into that, in the rear I’m 1.75” higher on the drivers side and in the front I’m 1.25”

Sponsored

 

[Ricklime22]

I’ll check into that, in the rear I’m 1.75” higher on the drivers side and in the front I’m 1.25”

It has front and rear adjustable track bars.

 

[NoGas]

It has front and rear adjustable track bars.

Thank you for the reply. I have swapped the springs from side to side and the issue remains. I will follow up once I get it figured out.

Mine is a 2021 JL 2Dr AT Rubi with Mopar lift running 35’s. As mentioned in post #39 above, included instructions were wrong and resulted in unlevel 1” L-R lean. Swapping front springs side-to-side as recommended by 4xFUN fixed my leaning issue. Had mine installed by dealer to avoid extended warranty coverage issues but dealer had me sign “This modification to instructions done at request of customer…”. Thankfully when springs swapped as described, Jeep once again sitting L-R level and that has remained so. Dealer did not charge to fix MOPAR’s error. Also added Fox TS Steering Stabilizer which provided noticeable improvement over OEM unit. Since mine is a JL 2Dr I cannot advise about others sorry.

View attachment 594626

Sponsored