Interior Plug Help

[GregMG79]

I got my new jeep ('24 Rubicon 3.6L( back from the dealer a week ago and finally got around to putting in my metal cloak dead pedal. When I went under the dash I noticed the OBD plug hanging (not in the port holder) and two other plugs hanging near it. I put the OBD plug back in the port holder and then connected the other two plugs that were similar in size to the OBD.

I have not driven it much yet to see if the CEL comes on (hasn't been on since I got it back a week ago), but does anyone have any idea what the plugs I circled are for? Concerned it came back from the dealership with these not connected and hanging down.

Sponsored

 

[Flip]

I'm not sure, I'll try to get inside my jeep later to see what that is for.

 

[Pape]

why was it at the dealer ?
Are they using 3rd party tools to work on it and forgot to plug back at the gateway ?
Also note when the gateway is not plugged the radio will be powerless.

 

[GregMG79]

It was at the dealer because of a CEL right after I bought it. The replaced a gas cap and something else. Drove it all week no issues with radio or anything. Just noticed the unplugged connector when I put in the dead pedal.

 

[Pape]

I did not notice you have a 2024, interesting, In the 2023 if I disconnect either of the 2 plug on the security gateway the radio go powerless.
I guess you can ask the advisor about it, maybe something to do about a lowjack that was installed by the dealer as protection while in inventory.

Sponsored