Forged Wheels

[y2kcbr600]

I hope you have better luck getting the caps than I did, and they fit the front. If they don’t unless you have a precision drill press pay the machine shop ($40) to not risk drilling thru the expense caps recommended.

The A-tak ones look raised unlike the flush mount ones it looks like you may have gotten. So I expect them to work. I just hope my Xtreme wheels and tires sell for good money! Ha!

Sponsored

 

[2nd 392]

The A-tak ones look raised unlike the flush mount ones it looks like you may have gotten. So I expect them to work. I just hope my Xtreme wheels and tires sell for good money! Ha!

Poor pic, but should work for reference

 

[y2kcbr600]

Correction; t-ak1. These look more raised?

https://www.campsite204.com/products/titan-7-t-ak1-center-caps-machine-black-only

 

[2nd 392]

Correction; t-ak1. These look more raised?

https://www.campsite204.com/products/titan-7-t-ak1-center-caps-machine-black-only

Not to me

 

[y2kcbr600]

Not to me

That's not good. I guess the machine shop will get some work then.not though.

 

[2nd 392]

That's not good. I guess the machine shop will get some work then.not though.

Oh yeah, I don’t just smack them in the middle to install, it’s awful thin after drilling.

 

[y2kcbr600]

Oh yeah, I don’t just smack them in the middle to install, it’s awful thin after drilling.

Titan 7 has discontinued thier center cap program due to too many variations. Essentially they make race wheels and racers don't run centercaps due to weight and safety. I was lucky enough to get one of the last sets to try, but have to get my own o-rings. Do you have an idea what size your o-rings are?

There is a set of four of the t-ak1 gold wheels for sale in Delaware on 37" Gerneral MTs if anyone is looking. I would have bought those, but...

 

[2nd 392]

Titan 7 has discontinued thier center cap program due to too many variations. Essentially they make race wheels and racers don't run centercaps due to weight and safety. I was lucky enough to get one of the last sets to try, but have to get my own o-rings. Do you have an idea what size your o-rings are?

There is a set of four of the t-ak1 gold wheels for sale in Delaware on 37" Gerneral MTs if anyone is looking. I would have bought those, but...

Evidently, the 1 and 2 have different size caps. Even the early and late 2’s were different so I had to send them a measurement pic. …. I suspect it will be trial and error for you….. damn, evidently I was lucky to finally get them even though they needed modification for the front.

 

[y2kcbr600]

Evidently, the 1 and 2 have different size caps. Even the early and late 2’s were different so I had to send them a measurement pic. …. I suspect it will be trial and error for you….. damn, evidently I was lucky to finally get them even though they needed modification for the front.

Good news and bad news. Got a fifth wheel! Got my center caps but there's no way the front caps will fit unless I cut some thread off the front axle.

 

[2nd 392]

Good news and bad news. Got a fifth wheel! Got my center caps but there's no way the front caps will fit unless I cut some thread off the front axle.

They have to be removed to lose some threads per the machine shop. Drilling the caps was quick and easy, just don’t smack them in the middle.

 

[y2kcbr600]

They have to be removed to lose some threads per the machine shop. Drilling the caps was quick and easy, just don’t smack them in the middle.

That was my plan like you and they could do that too, but it still won't work. My threads are longer than there is material on the cap.

 

[2nd 392]

That was my plan like you and they could do that too, but it still won't work. My threads are longer than there is material on the cap.

Different axles since 21 ? Interesting, but doesn’t make sense.
Edit- or are the AK1 caps more narrow than the 2’s ? pic previously posted

Sponsored