Door sill gaurd PPF

[R 3]

Here is the rough prototype of the front sill gaurd I out lined it in black sharpe to help distinguish.
I would like to hear some thoughts on the coverage and if more or less is wanted befor I put them into final production tomarrow
Thanks
Matt,

Sponsored

 

[FatBoy01]

@R 3

Coverage looks adequate to me.

 

[R 3]

Here is the rear prototype

 

[Chocolate Thunder]

Would these allow for the mopar plates to be installed on top of them? Also on the front ones, why not extend them all the way over to the edge of the seams of the sill?

 

[R 3]

You should be able to install any thing over the top of these as they are only 8 mil thick, nice catch on the over to the edge!
That is acually Revised in cad now!

 

[Mid-life Wrangler]

You should be able to install any thing over the top of these as they are only 8 mil thick, nice catch on the over to the edge!
That is acually Revised in cad now!

Any idea how much these will cost?

 

[Goin2drt]

Needs more coverage on the bottom. That line will look like crud and attract too much dirt. Needs to go all the way under IMO.

 

[R 3]

These are being revised to add material so they will go lower on the rocker.
Once revised I will have a better idea on cost.

 

[Yellow109r]

interested

 

[R 3]

Here it is with the revised length and depth

 

[R 3]

The door sill guards will be on the web site tomarrow
Prices will be
4 door set $65
2 door set $45
Forum members will get 10 percent off with code
jlwf or JLWF

 

[R 3]

Door sill guards are now on the web site.
Www.r3offroad.com

 

[glenville]

any pics of these installed, to get an idea...went to the website to get an idea

 

[$uicide$hift]

any pics of these installed, to get an idea...went to the website to get an idea

scroll up to post number 10 to see the pics of these installed

 

[glenville]

my bad, I did realize it was clear material..duh....

Sponsored