Black hood decal for Rubicon

[American Adventurist]

Ordered one from @pixeldecals ~ Hoping it’s better.

Sponsored

 

[aug0211]

Really want to see what these look like on a Granite Rubi!

 

[Cody6597]

I bought the Alpha Vinyl one. Total garbage. Arrived with pre-wrinkled and perma-creased vinyl. Clearly shipped by an angry, drunken monkey with zero fucks to give.

Messaged them about it and no response...

Caveat Emptor

Yep. Alpha Vinyl as well. Waste of money in my opinion. The cut outs were not straight and already had creases in it.

I threw it in the trash!

 

[FastDNA]

Yep. Alpha Vinyl as well. Waste of money in my opinion. The cut outs were not straight and already had creases in it.

I threw it in the trash!

Same here, tried to set in sun to remove wrinkles, didn’t work. Trash pile now, don’t waste money with Alpha.

 

[klhjeep2018]

Pixeldecals is the only way to go! Just installed the hood blackout today. Second purchase from Don at Pixeldecals. The vent blackouts I put on a month ago. First Class product, follow the instructions Don provides to a tee. No problems at all. 100% Happy! I would not order decals from any other company

 

[Vermillion]

@klhjeep2018 how did removing the hood shield go? Trying to figure out if I will need to order replacement attachment pieces (not sure how likely they are to break)

 

[klhjeep2018]

I removed the hood insulation under the hood. Plastic push pins hold it in. You’ll need to order 12new ones from quadratec. I broke all but 2. Then 4 nuts to remove the hood windshield bumpers. And un clip the washers. Does that help?

 

[Vermillion]

@klhjeep2018 Exactly what I wanted to know!

 

[klhjeep2018]

@klhjeep2018 Exactly what I wanted to know!

Good glad it helped

 

[Wzabrouski]

Pixeldecals is the only way to go! Just installed the hood blackout today. Second purchase from Don at Pixeldecals. The vent blackouts I put on a month ago. First Class product, follow the instructions Don provides to a tee. No problems at all. 100% Happy! I would not order decals from any other company

Can you post a photo of the vent black outs?

 

[klhjeep2018]

Can you post a photo of the vent black outs?

 

[Wzabrouski]

Thanks!

 

[klhjeep2018]

No problem. If you need anything else let me know

 

[yz kid]

I removed the hood insulation under the hood. Plastic push pins hold it in. You’ll need to order 12new ones from quadratec. I broke all but 2. Then 4 nuts to remove the hood windshield bumpers. And un clip the washers. Does that help?

Link for new push pins?

 

[klhjeep2018]

Quadratrec part number 55014.0957

Sponsored