Sponsored

Anyone using Rough Country Diff Skid Plate?

gato

Well-Known Member
Joined
Apr 4, 2021
Threads
28
Messages
2,404
Reaction score
3,714
Location
New England
Vehicle(s)
2021 JLUR
Which oil pan/transmission skid were you running that made contact with the front differential skid?
I know this is an old thread, but my RC M210 frond diff skid is making contact with my Artec aluminum engine skid, even with a 2" AEV spacer lift on top of my 2026 Rubicon X already taller springs and bump stop tower.

At first it would hit any time I hit even my ~1" driveway to road bump at anything above 8 MPH (but only if hit head on, never if hit at an angle one wheel before the other). I did some hand filing of the bracket/clamp that goes over the front diff, and it got much better, but still hit driving fast >12MPH over a speed bump. Took a grinding wheel to it and took good amount of metal from the bracket. Still hitting if I hit a speedbump at >20MPH while braking (I know, my Jeep is only 1 month old, and I haven't taken it off road, so I'm testing everything on speed bumps and flexing on parking lot rocks :)).

So tomorrow I will see where it is still hitting and grind some more. I also may turn my adjustable trackbar one turn to give it maybe another 1/32" of room - don't want to do any more as my axle is centered just fine.

If that does not solve it, I may need to remove these diff skids - would be a shame, they seem really nice - people talk s$#@ about RC, but their metal stuff is great in my opinion.
Sponsored

 

gato

Well-Known Member
Joined
Apr 4, 2021
Threads
28
Messages
2,404
Reaction score
3,714
Location
New England
Vehicle(s)
2021 JLUR
Forgot to ask, those having these front diff skids contact their engine skid found a solution? Thx.
 

gato

Well-Known Member
Joined
Apr 4, 2021
Threads
28
Messages
2,404
Reaction score
3,714
Location
New England
Vehicle(s)
2021 JLUR
Sorry. I’ve got the same diff skids, but no engine skid.
Thanks. At least is it holding up? Does it require retightening periodically? Did it do it's job well taking hits?
 

Wabujitsu

Well-Known Member
First Name
Jeff
Joined
Jul 26, 2019
Threads
157
Messages
3,973
Reaction score
8,182
Location
Sarasota, FL
Vehicle(s)
2021 JLUR, 2020 JLU Sahara
Build Thread
Link
Occupation
Retired US Army
Vehicle Showcase
1
Thanks. At least is it holding up? Does it require retightening periodically? Did it do it's job well taking hits?
Cat, they are holding up very well! I haven’t checked to see if the bolts need tightening (I guess I better - thanks!), and I’ve beat both up pretty good with no issues, both here in FL on tree stumps, etc, and out in AZ on rocks.
Sponsored

 
 







Top