ABS error help

[Grayhound]

I started getting an abs error while climbing a sand dune. Thought it was the sensor for the front right replaced it still get the error. Replaced the hub and still get the error.

What I’ve determined is I only get the error when breaking and turning right. Sensor tests fine , hub is brand new. What an I missing?

Sponsored

 

[Grayhound]

Update: had help diagnosing and found a lead to the wheel speed sensor above the connection on the main wiring harness was broken. Reconnected it and heated it up taped it up and I seem to be good to go!

 

[04yfz]

Update: had help diagnosing and found a lead to the wheel speed sensor above the connection on the main wiring harness was broken. Reconnected it and heated it up taped it up and I seem to be good to go!

Any chance you can share a pic of the area you found this break? I am having identical issues and it’s the same sensor, happens when I hit bumps.

 

[Grayhound]

Any chance you can share a pic of the area you found this break? I am having identical issues and it’s the same sensor, happens when I hit bumps.

Sorry I didn’t get pics. Just follow your wiring harness up from the connector.

 

[04yfz]

Sorry I didn’t get pics. Just follow your wiring harness up from the connector.

How far did you have to go? Where the thin abs sensor end meets the bigger harness? Or further in?

 

[Grayhound]

How far did you have to go? Where the thin abs sensor end meets the bigger harness?

Not quite that far. I would jack up the frame near the area you’re having issues and that should give you clearance. From there you should be able to unwrap the wire harness and will probably fine a bare wire.

Sponsored